Ge Plug-In Digital Timer 15089 version 1 & 2 Manuel d'utilisateur télécharger pdf

Initial Set Up:

1. If the LCD screen is displaying numbers, you are ready to program, please

proceed to step 2. If the screen is blank plug in the timer and leave for two

hours to charge internal battery before programming.

2. Use a toothpick or sharp pencil to push the RESET button. Once pushed,

the screen will go blank brieﬂy and then display 12:00 AM. See Figure 2.

Setting the Time:

1. Press and hold down the “CLOCK” button through the time and day setting

process.

2. Holding “CLOCK” button down, press the “HOUR” button until the current

hour is found. Take note of AM/PM in bottom right of display. See Figure 1.

3. Press the “MINUTE” button, keeping the “CLOCK” button depressed.

Continue to press the “MINUTE” button until the current minute is found.

4. Press the “DAY” button, keeping the “CLOCK” button depressed. Continue to

press the “DAY” button until the current day is found.

5. When current day is found release "CLOCK" button.

Programming ON/OFF Times:

Note: While programming, if no button is pushed for 10 seconds the timer will

return to the clock display.

1. Press & release the “PROGRAM” button to

start programming. The screen will show

1ON and all of the days of the week. See

Figure 3

2. Press ”DAY” to scroll through the options for

the days of the week you want to program:

• MO TU WE TH FR SA SU

• MO>TU>WE>TH>FR>SA>SU (to show every single day of the week one by

one, which means the on/off setting is only activated on this selected day)

• MO TU WE TH FR

• SA SU

• MO TU WE TH FR SA

• MO WE FR

• TU TH SA

• MO TU WE

• TH FR SA

3. Find the days that you would like the timer to function and stop pushing

the “DAYS” button leaving the days you want the timer to function showing

on the display.

4. Press the “HOUR” button until the hour you want the timer to activate is

showing on the display. (The AM and PM is displayed in the lower right

hand corner of the display. Make sure it is correct when setting the time).

5. Press the “MINUTE” button until the minute you want the timer to activate

is showing on the display.

6. Press & release “PROGRAM” to set the 1OFF time. Repeat steps 1 -5 to

program when you want the timer to turn OFF for program 1.

7. Press "PROGRAM" to move onto Program 2 (P2ON) and repeat steps

1-6 if you want to program additional ON/OFF times, or press "CLOCK"

(at anytime) to ﬁnish programming. You can prgram up to 20 ON/OFF

programs to run simultaneously!

8. Once programming is complete, pressing "CLOCK" returns you

to "clock mode."

9. Once all programming is complete make sure lamp or device is set in the

ON position. Plug the light or device into the timer and plug the timer into

the wall. Your timer is ready to use!

Note: The lamp or device will not come on until the next ON time is triggered.

To manually turn the device ON and start the program, cycle the ON/OFF

button until the light/device turns on and the display reads AUTO ON. You can

also use the ON/OFF button to override the timer and set to ON (always on) or

OFF (always off).

Remarks:

1. While in programming mode, the programmed time can be cancelled or

resumed by pressing the “RECALL” (RCL) button.

2. ON/OFF time becomes effective immediately once the setting is done.

3. Light/Device must be turned ON when plugged into timer or timer will not

control the appliance.

ON/OFF Options:

There are 4 settings for the timer; Press the “ON/OFF” button to scroll through

the options and stop at the option desired.

a. ON – Timer outlet is always ON (Overrides Programming).

b. AUTO ON – Timer outlet is currently ON and will turn OFF at next

programmed OFF time.

c. OFF – Timer outlet is always OFF (Overrides Programming).

d. AUTO OFF – Timer outlet is currently OFF and will turn on at the next

programmed ON time.

The timer program will control the appliance if set to AUTO ON or AUTO OFF.

Random Security Option (RND):

This program option will turn lights ON and OFF using the programmed

times + or - 30 minutes, giving the home a more lived in appearance while

occupant is away.

1. Press the “HOUR” (RND) button for 5 seconds to activate the random

feature. The display will show the RND icon above the seconds on the

display. See Figure 1.

2. Press the “HOUR” (RND) button for 5 seconds to deactivate the random

feature. The display will not show the RND icon. See Figure 1.

Daylight Savings Time (DST) Easy Adjust Feature:

Push the “CLOCK” button for 5 seconds to advance the current time 1 hour,

+1h icon should appear on the lower left corner of the display. Repeating

this process will decrease the time by 1 hour and the +1h icon will disappear.

See Figure 1.

Digital Timer

15089

4-2011

www.jascoproducts.com

RESET

MINUTE

- While holding CLOCK button, press to set minute (time).

- While in programming mode, press to set minute for ON/OFF times.

DAY

- While holding CLOCK button, press to set day of week.

- While in programming mode, press to scroll through options

for days of the week.

HOUR (RND)

- While holding CLOCK button, press to set hour (time).

- While in programming mode, press to set hour for ON/OFF times.

- While in clock mode, press and hold (3 sec.) to activate random

security feature.

RCL

In programming mode, press to cancel or

restore ON/OFF time shown.

PROGRAM

Press to enter timer programming mode.

CLOCK (DST)

- To set time/day, hold down CLOCK and

press HOUR>MINUTE>DAY buttons.

- In clock mode, hold down for 5 sec. to

move forward or back an hour (Daylight

Savings Adjust).

ON/OFF (push to scroll)

ON= Always ON

Auto ON/OFF = Timer is active

OFF = Always OFF

DISPLAY SHOWN IN STANDARD “CLOCK” MODE DISPLAY.

PRESS AND HOLD TO RESET ALL THE

PROGRAMS PERMANENTLY

Figure 1

Figure 2 LCD display

Ready to set

Figure 3

If your Timer looks like this,

use the following instructions

If your Timer does not look

like this, go to the next page

1 2

Digital Timer 1

Résumé du contenu

Page 1 - Digital Timer

Initial Set Up:1. If the LCD screen is displaying numbers, you are ready to program, please proceed to step 2. If the screen is blank plug in the tim

Page 2

   Digital Timer Models: 15042, 15089, and 15079Install Set Up:1. Ifthetimescreeniscompletelyblankitwillneedto

Commentaires sur ces manuels

Pas de commentaire

Ge Plug-In Digital Timer 15089 version 1 & 2 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Horloge Ge Plug-In Digital Timer 15089 version 1 & 2. GE Plug-In Digital Timer 15089 version 1 & 2 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Horloge Ge Plug-In Digital Timer 15089 version 1 & 2