Ge PT916SM Manuel d'utilisateur télécharger pdf

Listed by

Underwriters

Laboratories

For answers to your Monogram,

GE Profile

™

appliance questions, visit our website at

ge.com or call GE Answer Center

service,

800.626.2000.

Dimension and installation information are shown in inches.

Specification Revised 10/07

220243

PT916SM

GE Profile

™

30" Built-In Single Convection Wall Oven

KW Rating

240V

4.5

208V

3.4

Breaker Size

240V

20 Amps

208V

20 Amps

Most 30” Wall Cabinets can be used with this unit.

Note: These ovens are not approved for

stackable installations. Cabinets installed

adjacent to wall ovens must have an adhesion

spec of at least a 194°F temperature rating.

Door handle protrudes 3" from door face. Cabinets

and drawers on adjacent 45° and 90° walls should

be placed to avoid interference with the handle.

Electric wall ovens are not approved for

installation with a plug and receptacle. They

must be hard wired in accordance with

installation instructions.

Installation Information: Before installing, consult

installation instructions packed with product for

current dimensional data.

Side-by-side installations require at least 2"

between cutouts.

2 x 4 or

equivalent

runners

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

(must support 275 lbs.)

Cutout width

28-1/2'' MIN.

28-5/8'' MAX.

29-3/4

Recommended

cutout location

32-1/2"

from floor

Junction

box

location

Allow minimum of 21'' for clearance

to adjacent corners, drawers, walls, or etc.

A=Allow 1" overlap of oven over top and bottom edges of cutout.

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

C=28-1/4" without trim and 28-3/4" with trim.

Conduit

(72"

long)

27-1/4'' MIN.

27-5/16'' MAX.

Cutout height

23-1/2'' MIN.

Cutout depth

22'' MIN.

2 x 4 or

equivalent

runners

Suitable

bracing

to support

runners

21-5/8"

over centerline

of cabinet

(must support 275 lbs.)

Cutout width

28-1/2'' MIN.

28-5/8'' MAX.

29-3/4

Recommended

cutout location

32-1/2"

from floor

Junction

box

location

Allow minimum of 21'' for clearance

to adjacent corners, drawers, walls, or etc.

A=Allow 1" overlap of oven over top and bottom edges of cutout.

B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.

C=28-1/4" without trim and 28-3/4" with trim.

Conduit

(72"

long)

27-1/4'' MIN.

27-5/16'' MAX.

Cutout height

23-1/2'' MIN.

Cutout depth

22'' MIN.

Dimensions and Installation Information (in inches)

1 2 3

PT916SM 1

Résumé du contenu

Page 1 - PT916SM

Listed by Underwriters LaboratoriesFor answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answ

Page 2

Optional Undercounter Dimensions and Installation Information Dimension and installation information are shown in inches.Listed by Underwriters Labora

Page 3

Specification Revised 10/07220243PT916SM GE Profile™ 30" Built-In Single Convection Wall Oven Features and Benefits• Glass Touch Controls - Fea

Commentaires sur ces manuels

Pas de commentaire

Ge PT916SM Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Fours à convection Ge PT916SM. GE PT916SM User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Fours à convection Ge PT916SM