Ge 16197920 Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléphone sans fil à combiné Ge 16197920. GE 16197920 User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
INTRODUCTION
CAUTION: When using telephone equipment, there
are basic safety instructions that should always be
followed. Refer to the IMPORTANT SAFETY
INSTRUCTIONS provided with this product and save
them for future reference.
This telephone has been designed to be simple to use,
however, you can reach its full potential more quickly by
taking a few minutes to read this user’s Guide. This
telephone is a multifunction product for use with the Call
Waiting Caller ID services available from you local
telephone company.
Your Call Waiting Caller ID phone stores and displays
specific information, provided by your local telephone
company, to subscribers of Caller ID or similar caller
identification services.
Your Call Waiting Caller ID phone allows you to:
•View the name and telephone number of a caller.
• Identify callers before you answer the phone.
•View the time and date of each incoming call.
• Store up to 40 Caller ID records sequentially.
• Know who is calling while you are on the phone or
when you are away.
•Screen unwanted calls, eliminate harassment from
annoying calls, or to get prepared before answering a call.
To get the most from your new phone, we suggest that
you take a few minutes right now to read through this
user's guide.
IMPORTANT: In order to use all of the Caller ID features of
this phone, you must subscribe to either the standard Name/
Number Caller ID Service or Call Waiting Caller ID Service. To
know who is calling while you are on the phone, you must
subscribe to Call Waiting Caller ID Service.
IMPORTANT: Because cordless phones operate on electricity,
you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.
BEFORE YOU BEGIN
PARTS CHECKLIST
Make sure your package includes the items shown here.
HANDSET, BASE AND REMOTE
CHARGER LAYOUT
SWITCHING BATTERY PACKS
The battery packs are interchangable. While one battery
pack is charging, the other is in use. To remove the battery
pack from the handset, push in on the tabs and pull. To
attach the battery pack to the handset, snap the battery
pack onto the bottom of the handset.
INSTALLING THE PHONE
CONNECTING THE TELEPHONE LINE
1. Connect one end of the telephone line cord to the LINE
jack on the bottom of the base.
2. Connect the other end of the telephone line cord to a
telephone jack on the wall.
3. Raise the antenna on the base.
CONNECTING THE AC (ELECTRICAL)
P
OWER
1. Plug the base into an electrical outlet.
2. Place the remote charger on a flat surface. Plug the
power supply into an electrical outlet.
INSTALLING THE BATTERY PACK
1. Detach the battery pack from the handset by pressing
the side tabs.
2. Remove the "Prior to Use" tag.
3. Re-attach the battery pack to the handset.
4. Place the handset in the charge cradle on the remote
charger and charge for 12 hours prior to first use.
NOTE: If you don't properly charge the handset, battery
performance is compromised.
5. Place the extra battery pack on the battery charge cradle
on the remote charger and charge for 12 hours prior to
first use.
SET UP
There are five programmable menus available: Language,
Area Code, Ringer Tone, Tone/Pulse Dialing, and Default
Setting.
NOTE: To program these settings, the handset must be OFF
(not in TALK mode).
LANGUAGE
Set the display language to show messages in either
English, Spanish, or French.
1. Press the program/flash button until
1ENG 2FRA 3ESP
shows in the display.
2. Use the cid/vol (+/> or -/<) buttons or the handset touch-
tone pad to choose
1ENG
(English),
2FRA
(French) or 3
ESP
(Spanish).
3. Press program/flash to store selection.
AREA CODE
1. Press the program/flash button until
AREA CODE
---
shows in the display. --- is the default setting.
2. Use the handset number pad to enter your three digit
area code.
NOTE: If you make a mistake, press the delete/channel
button to erase the wrong area code and repeat step 2.
3. Press program/flash to store selection.
RINGER TONE
You may choose from three different ringer tones.
1. Press the program/flash button until
RINGERTONE
shows in the display. 1 is the default setting.
2. Use the cid/vol (+/> or -/<) buttons or the handset
touch-tone pad to move the arrow to 1, 2 or 3.
3. Press program/flash to store selection.
TONE/PULSE DIALING
Set your phone according to the type of service you are
subscribed to.
1. Press the program/flash button until
1TONE 2PULSE
shows in the display.
2. Use the cid/vol (+/> or -/<) buttons or the handset
touch-tone pad to select
1TONE
if you have touch-tone
service or
2PULSE
if you have rotary service.
3. Press program/flash to store selection.
DEFAULT SETTING
You may use the factory default settings or your
own settings.
1. Press the program/flash button until
DEFAULT
shows in
the display ,
1 NO
is the default setting.
2. Use the cid/vol (+/> or -/<) buttons or the handset
touch-tone pad to select
1 NO
to use your settings or
2 YES
to restore the factory default settings.
3. Press program/flash to store selection. You will hear a
confirmation tone.
TELEPHONE OPERATION
HANDSET REGISTRATION
The handset is pre-registered. If your handset is not
registered, follow these steps:
1. Make sure the phone is OFF (not inTALK mode).
2. Press and hold the format button on the handset until
you hear a beep and
PRESS AND HOLD BASE PAGE KEY
shows in the handset's display.
3. Move the handset close to the base.
4. Press and hold the base page button.
NOTE: You must press the page button on the base within 30
seconds to continue registration.
5. You will hear a confirmation tone when the registration
is complete, and the handset's display shows
REGISTERED
.
MAKING A CALL
1. Press the CALL BACK/TALK button.
2. When you hear a dial tone, dial a telephone number.
Or
Dial the phone number first, then press the CALL BACK/
TALK button.
3. When finished, press the CALL BACK/TALK button again
to hang up.
ANSWERING A CALL
1. Pick up the handset and press the CALL BACK/TALK
button.
NOTE: The CALL BACK/TALK button is disabled when the
handset is in the remote charger cradle.
2. To disconnect a call, place the handset back in the
cradle on the remote charger or press the CALL BACK/
TALK button again.
REDIAL
While the phone is on, press the redial button to
immediately redial the last number you dialed (up to 32
digits). If you get a busy signal, and want to keep dialing
the number, just press redial again (you don't have to turn
the phone off and back on).
FLASH
Use the program/flash button to activate custom calling
services such as call waiting or call transfer, which
are available through your local phone company.
TIP: Don’t use the CALL BACK/TALK button to activate
custom calling services such as call waiting, or you’ll hang
up the phone.
IN USE INDICATOR LIGHT
The in use indicator is lit when the handset is charging in the
cradle on the base or when the phone is ON. It flashes when
you receive a call or when the page button is pressed.
CHANNEL BUTTON
While talking, you might need to manually change the
channel in order to get rid of static. Press and release
the delete/channel button to advance to the next
channel. The current channel number appears on the left
side of the display.
TEMPORARY TONE
This feature is useful only if you use pulse dialing service.
temporary tone dialing enables pulse (rotary) service
phone users to access touch-tone services offered by
banks, credit card companies, etc. For example, when you
call your bank you may need to enter your account
number. Using the temporary tone feature allows you to
temporarily switch to touch tone mode so you can enter
and send your number.
1. Dial the telephone number and wait for the line to connect.
2. When your call is answered, press the *tone/exit button
on your handset number pad to temporarily change
from pulse dialing to tone dialing.
3. Follow the automated instructions to get the information
you need.
4. Hang up the handset and the phone automatically
returns to pulse (rotary) dialing mode.
CANCEL
Press the *tone/exit button to cancel any command you
initiated.
FINDING THE HANDSET
This feature helps locate a misplaced handset.
Press the page button on the base. The handset beeps
continuously for about two minutes or until you press any
button on the handset. You may also press page to cancel.
NOTE: The ringer does not have to be ON for this feature
to work.
RINGER BUTTON
Three options are available:
RINGER OFF, LOW
, and
HIGH
.
The default setting is
RINGER LOW
.
1. When the phone is OFF (not in TALK mode), press
RINGER once to listen to the current ringer tone.
2. Use the cid/vol (+/> or -/<) buttons to choose the ringer
level you want.
3. Press RINGER again to store selection. The desired
setting shows in the display.
NOTE: If you turn the ringer off, the display shows RINGER =
OFF when the phone is in standby mode.
VOLUME
While talking, press the cid/vol (+/> or -/<) buttons to
adjust the listening level of the handset's earpiece. There
are four volume levels. Press the right arrow (+/>) button to
increase the volume level, and press the left arrow (-/<)
button to decrease. VOL 1 is the lowest level and VOL 4 is
the loudest.
CALL TIMER
While you are talking on the phone, the total talk time is
displayed on the bottom line of the display.
CALLER (CID) FEATURES
Caller ID (CID) is a service available from your local
telephone company. For Caller ID to work on this system,
you must subscribe to Caller ID service from you local
telephone company.
This unit receives and displays CID information
transmitted by your local telephone company. This
information can include the phone number, date, and time;
or the name, phone number, date, and time. The unit
stores up to 40 calls for later review.
CALL WAITING CALLER ID
To receive Caller ID information for a Call Waiting call, you
must subscribe to the combined Call Waiting Caller ID
service from your local telephone company. Call Waiting
Caller ID service allows you to see Caller ID information for
an incoming call while you are on the telephone.
IMPORTANT: In order to use all of the Caller ID features of
this unit, you must subscribe to either the standard Name/
Number Caller ID Service or Call Waiting Caller ID Service. To
know who is calling while you are on the phone, you must
subscribe to Call Waiting Caller ID Service.
RECEIVING AND STORING CID
R
ECORDS
When you receive a call, the information is transmitted by
the phone company to your Caller ID telephone between
the first and second ring.
When the memory is full, a new call automatically replaces
the oldest call in memory.
NEW
appears in the display for
calls received that have not been reviewed. REPT indicates
that a new call from the same number was received more
than once.
NOTE: Check with your local phone company regarding
name service availability.
REVIEWING CID RECORDS
As calls are received and stored, the display is updated to
let you know how many calls have been received.
•Press the cid/vol (-/<) arrow button to scroll through the
call records from the most recent to the oldest.
•Press the cid/vol (+/>) arrow button to scroll through the
call records from the oldest to the newest.
TRANSFERRING CID RECORDS TO
MEMORY
You may transfer a CID record to your phone’s memory.
NOTE: It is important that you format CID records correctly
before storing in memory. It is not possible to re-format CID
records stored in memory.
1. Use the cid/vol (-/<) arrow or cid/vol (+/>) arrow button
to scroll to the desired record.
2. Press the memory button.
3. Press the desired memory location. You will hear a
confirmation tone. Example, press the number 1 key to
store the record in memory location 1.
To r eplace a CID record stored in a memory location with a
new CID record:
1. Repeat steps 1 through 2.
2. Press the memory button and
REPLACE MEMO?
shows
in the display.
3. Press *tone/exit to exit, or press memory again and the
new CID record replaces the old CID record in that
memory location. You will hear a confirmation tone.
DELETING A CID RECORD
1. Make sure the phone is OFF (not in TALK mode).
2. Use the cid/vol (-/<) arrow or cid/vol (+/>) arrow button
to display the desired Caller ID record.
3. Press delete/channel. The display shows
DELETE?
4. Press delete/channel again to erase the record showing
in the display. You will hear a confirmation tone. The
display shows
DELETED
and the next Caller CID record
shows in the display.
DELETING ALL CID RECORDS
1. Make sure the phone is OFF (not in TALK mode).
2. Use the cid/vol (-/<) arrow or cid/vol (+/>) arrow button
to display any Caller ID record.
3. Press and hold channel/delete button until the unit
beeps and
DELETE ALL?
shows in the display.
4. Press delete/channel again to erase all CID records.
You will hear a confirmation tone, and the display
shows
NO CALLS
.
26989
40-Channel 900 MHz Call Waiting
Caller ID Cordless Telephone
User's Guide
We bring good things to life.
ATLINKS USA, Inc.
101 West 103rd Street
Indianapolis, IN 46290
© 2003 ATLINKS USA, Inc.
Trademark(s) ® Registered
Marca(s) ® Registrada(s)
Model 26989
16197920 (Rev. 1 DOM E)
03-43
Printed in China
SEE MARKING ON BOTTOM / BACK OF PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
CAUTION:
US NUMBER IS LOCATED ON THE CABINET BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
TELEPHONE JACK REQUIREMENTS
To use this phone, you need an
RJ11C type modular telephone jack,
which might look like the one
pictured here, installed in your home.
If you don’t have a modular jack, call
your local phone company to find out
how to get one installed.
INSTALLATION NOTE: Some cordless telephones operate
at frequencies that may cause interference to nearby TVs,
microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be
placed near or on top of a TV, microwave ovens, or VCR. If
such interference continues, move the cordless telephone
farther away from these appliances.
DIGITAL SECURITY SYSTEM
Your cordless phone uses a digital security system to
provide protection against false ringing, unauthorized
access, and charges to your phone line.
Remote charger with
battery pack
Handset with battery
pack
EQUIPMENT APPROVAL INFORMATION
Your telephone equipment is approved for connection to the Public Switched Telephone
Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the
Technical Requirements for Telephone Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the US
number and Ringer Equivalence Number (REN) for the equipment. You must, upon
request, provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your telephone number is
called. In most (but not all) areas, the sum of the RENs of all devices connected to one
line should not exceed 5. To be certain of the number of devices you may connect to
your line as determined by the REN, you should contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.
Notes
• This equipment may not be used on coin service provided by the telephone
company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use
your own telephone equipment if you are on a party line. Check with your local
telephone company.
• Notice must be given to the telephone company upon permanent disconnection of
your telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this product does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your telephone
company or a qualified installer.
2 Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone network,
the telephone company shall, where practicable, notify you that temporary discontinuance
of service may be required. Where prior notice is not practicable and the circumstances
warrant such action, the telephone company may temporarily discontinue service
immediately. In case of such temporary discontinuance, the telephone company must: (1)
promptly notify you of such temporary discontinuance; (2) afford you the opportunity to
correct the situation; and (3) inform you of your right to bring a complaint to the Commission
pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities, equipment,
operations or procedures where such action is required in the operation of its business and
not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the
use or performance of your telephone equipment, the telephone company must give you
adequate notice, in writing, to allow you to maintain uninterrupted service.
HEARING AID COMPATIBILITY (HAC)
This telephone system meets FCC standards for Hearing Aid Compatibility.
Modular
telephone
line jack
Wall plate
Telephone
line cord
CALL BACK
TALK
FORMAT
abc
2
jkl
5
tuv
8
oper
0
def
3
mno
6
wxyz
9
#
1
ghi
4
pqrs
7
*
tone
pause
exit
redial
ringer
memory
delete/channel
program/flash
Base unit
page
CALL BACK
TAL K
FORMAT
abc
2
jkl
5
tuv
8
oper
0
def
3
mno
6
wxyz
9
#
1
ghi
4
pqrs
7
*
tone
pause
exit
redial
ringer
memory
delete/channel
program/flash
p
a
g
e
Display
CALL BACK/
TALK button
FORMAT button
redial button
delete/channel
button
program/flash
button
Battery pack
memory button
ringer button
# pause button
cid/vol (+/> or -/<)
buttons
page button
in use/page
indicator
Telephone jacks
Antenna
AC Power supply cord Charge indicators
Battery charge cradle
Handset charge cradle
IMPORTANT INSTALLATION
INFORMATION
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the
jack is specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals,
unless the telephone line has been disconnected at the
network interface.
• Use caution when installing or modifying telephone lines.
•Temporarily disconnect any equipment connected to the
phone such as faxes, other phones, or modems.
IMPORTANT INSTALLATION GUIDELINES
• Install telephone near both a telephone (modular) jack
and an electrical power outlet.
•Avoid sources of noise, such as a window by a busy
street, and electrical noise, such motors, microwave
ovens, and fluorescent lighting.
•Avoid heat sources, such as heating air ducts, heating
appliances, radiators, and direct sunlight.
•Avoid areas of excessive moisture or extremely low
temperature.
•Avoid dusty locations.
•Avoid other cordless telephones or personal computers.
CHARGING THE BATTERY PACKS
For your convenience, this shop phone includes two
rechargable battery packs. One battery pack is attached to
the bottom of the cordless handset, and the other is
attached to the top of the recharge cradle. While one is in
use, the other is charging.
NEW CALL #
Caller ID nameCaller ID phone number
Time
Date
New call
1
2
Résumé du contenu
Page 1 - We bring good things to life
INTRODUCTIONCAUTION: When using telephone equipment, thereare basic safety instructions that should always befollowed. Refer to the IMPORTANT SAFETYIN
Page 2 - TELEPHONE SOLUTIONS
DIALING A CID NUMBER1. Make sure the phone is OFF (not in TALK mode).2. Use the cid/vol (-/<) arrow or cid/vol (+/>) arrow buttonto display the
Produits connexes et manuels pour Téléphone sans fil à combiné Ge 16197920
(2 pages)
(96 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.501 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels