Ge 21002 Manuel d'utilisateur télécharger pdf

Extra Handset and Recharge Cradle

with Call-Waiting Caller ID for Use with

Models 21025 and 21095

User’s Guide

EQUIPMENT APPROVAL INFORMATION

Your telephone equipment is approved for connection to the Public

Switched Telephone Network and is in compliance with parts 15 and

68, FCC Rules and Regulations and the Technical Requirements for

Telephone Terminal Equipment published by ACTA.

1 Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among

other information, the US number and Ringer Equivalence

Number (REN) for the equipment. You must, upon request,

provide this information to your telephone company.

The REN is useful in determining the number of devices you may

connect to your telephone line and still have all of these devices

ring when your telephone number is called. In most (but not all)

areas, the sum of the RENs of all devices connected to one line

should not exceed 5. To be certain of the number of devices you

may connect to your line as determined by the REN, you should

contact your local telephone company.

A plug and jack used to connect this equipment to the premises

wiring and telephone network must comply with the applicable

FCC Part 68 rules and requirements adopted by the ACTA. A

compliant telephone cord and modular plug is provided with this

product. It is designed to be connected to a compatible modular

jack that is also compliant. See installation instructions for

details.

We bring good things to life.

21002

Model 21002

16272270 (Rev. 0 DOM E)

03-34

Printed in China

ATLINKS USA, Inc.

101 West 103rd Street

Indianapolis, IN 46290

Trademark(s) ® Registered

Marca(s) Registrada(s)

Notes

• This equipment may not be used on coin service provided by the

telephone company.

•Party lines are subject to state tariffs, and therefore, you may not

be able to use your own telephone equipment if you are on a

party line. Check with your local telephone company.

• Notice must be given to the telephone company upon permanent

disconnection of your telephone from your line.

• If your home has specially wired alarm equipment connected to

the telephone line, ensure the installation of this product does

not disable your alarm equipment. If you have questions about

what will disable alarm equipment, consult your telephone

company or a qualified installer.

2 Rights of the Telephone Company

Should your equipment cause trouble on your line which may

harm the telephone network, the telephone company shall, where

practicable, notify you that temporary discontinuance of service

may be required. Where prior notice is not practicable and the

circumstances warrant such action, the telephone company may

temporarily discontinue service immediately. In case of such

temporary discontinuance, the telephone company must: (1)

promptly notify you of such temporary discontinuance; (2) afford

you the opportunity to correct the situation; and (3) inform you of

your right to bring a complaint to the Commission pursuant to

procedures set forth in Subpart E of Part 68, FCC Rules and

Regulations.

The telephone company may make changes in its

communications facilities, equipment, operations or procedures

where such action is required in the operation of its business and

not inconsistent with FCC Rules and Regulations. If these changes

are expected to affect the use or performance of your telephone

equipment, the telephone company must give you adequate

notice, in writing, to allow you to maintain uninterrupted service.

FCC RF EXPOSURE REQUIREMENTS

For body worn operation, this phone has been tested and meets the

FCC RF exposure guidelines when used with the belt clip supplied

with this product. Use of other accessories may not ensure

compliance with FCC RF exposure guidelines.

INTERFERENCE INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference; and (2) This device must accept any

interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation.

3. Close the battery compartment by pushing the cover up until it

snaps into place.

4. Place the handset in the charging cradle.

5. Allow the handset to charge for 16 hours prior to registration to

models 21025 or 21095. If you don't properly charge the phone,

battery performance is compromised.

IMPORTANT: After you place the handset in the cradle the

display shows "SEARCHING..." and " HANDSET NEEDS

REGISTRATION" alternately. Wait until the handset charges

properly, then register the handset to the base before use.

PROGRAMMING THE TELEPHONE

HANDSET REGISTRATION

CAUTION: Make sure the extra handset is registered

before use.

NOTE: This extra handset is only available for 21025 and

21095 series.

During the registration process, keep your handset near the base.

When your handset shows the following:

1. Press the mute /program button until

REGISTRATION 1YES 2NO

shows in the display. The default setting is

2. Press the cid/vol ( or ) button to scroll to

1YES

2NO

, or use

the touch tone pad on your handset to enter your selection.

3. Press the mute/program button and

HOLD BASE PAGE WAIT FOR

BEEP

shows in the display.

4. Press and hold the page/int button on the base of Model 21095 or

the page button on the base of Model 21025 until you hear a long

beep and the handset displays

HANDSET # REGISTERED

displays, and you will hear a confirmation tone.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna (that is, the antenna

for radio or television that is “receiving” the interference).

•Reorient or relocate and increase the separation between the

telecommunications equipment and receiving antenna.

• Connect the telecommunications equipment into an outlet on a

circuit different from that to which the receiving antenna is

connected.

If these measures do not eliminate the interference, please consult

your dealer or an experienced radio/television technician for

additional suggestions. Also, the Federal Communications

Commission has prepared a helpful booklet, “How To Identify and

Resolve Radio/TV Interference Problems.” This booklet is available

from the U.S. Government Printing Office, Washington, D.C. 20402.

Please specify stock number 004-000-00345-4 when ordering copies.

HEARING AID COMPATIBILITY

This telephone system meets FCC standards for Hearing Aid

Compatibility.

US NUMBER IS LOCATED ON THE CABINET BOTTOM

INTRODUCTION

CAUTION: When using telephone equipment, there are

basic safety instructions that should always be followed. Refer

to the IMPORTANT SAFETY INSTRUCTIONS provided with

this product and save them for future reference.

Congratulations on purchasing this extra GE cordless handset with Call

Waiting Caller ID. This telephone has been designed to be simple to

use, however, you can reach its full potential more quickly by taking a

few minutes to read this instruction book. This telephone is a

multifunction product for use with Call Waiting and Caller ID services

available from your local telephone company.

Your Call Waiting Caller ID phone allows you to:

• view the name and telephone number of a caller while you are on

the phone (Call Waiting Caller ID).

• identify callers before you answer the phone.

• view the time and date of each incoming call.

• record up to 40 Caller ID messages sequentially in each handset

and the base.

• know who called while you are on the other line or when you

were away.

• screen unwanted calls, eliminate harassment from annoying

calls, or to get prepared before answering a call.

HANDSET NAME

1. Use the touch-tone keypad to enter the name (up to 15 characters).

More than one letter is stored in each of the number keys. For

example, to enter the name Bill Smith, press the 2 key twice for the

letter B. Briefly pause and the cursor moves to the next field. Press

the 4 key 3 times for the letter I. Briefly pause and the cursor moves

to the next field. Press the 5 key 3 times for the second letter L.

Briefly pause and the cursor moves to the next field. Press the 5 key

3 times for the second letter L, press 1 key to add a space. Press the

7 key 4 times for the letter S. Briefly pause and the cursor moves to

the next field. Press the 6 key once for the letter M. Briefly pause and

the cursor moves to the next field. Press the 4 key 3 times for the

letter I. Briefly pause and the cursor moves to the next field. Press

the 8 key for the letter T. Briefly pause and the cursor moves to the

next field. Press the 4 key twice for the letter H.

NOTE: If you make a mistake press the flash/delete button to

backspace and erase the wrong character(s).

NOTE: Press mute/program once to skip this step and exit to

standby screen.

NOTE: Press the exit/answerer button on the handset once to

keep the previous setting and return to standby mode.

2. Press the mute/program button to save the name and return to

main menu. You will hear a confirmation tone.

HANDSET DE-REGISTRATION

Deregistration cancels a handset’s registration. If you do not know a

handset’s name, you should deregister the handset according to the

steps below. During the de-registration process, keep the handset

near the base.

WARNING: It is not recommended that a handset be de-

registered unless absolutely necessary because once a

handset is de-registered, that handset's telephone features

cannot be used until the handset is re-registered.

1. Make sure your handset is in menu mode and make sure your

phone is OFF (not in talk mode).

2. Press the mute/program button until

DEREGISTRATION 1YES

2NO

shows in the display.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

CAUTION:

charge

charge indicator

AC power supply

wxyz

mno

def

tuv

jkl

abc

pqrs

ghi

oper

pause

tone

ringerpage

flash

redial

format

mute

mem

exit

talk

deleteint

erase

conference

CID Vol

answerer

program

play/stop

skipreview

* tone button

# pause button

Display

format/conference button

talk/callback button

redial button

page/int button

ringer button

flash/delete button

CID/vol buttons

mute/program button

mem (memory) button

exit/answerer button

review button

play/stop button

skip button

erase button

IMPORTANT: Because cordless phones operate on electricity,

you should have at least one phone in your home that isn’t

cordless, in case the power in your home goes out.

IMPORTANT: In order to use all of the features of this

telephone, you must subscribe to two separate services available

from your local telephone company: the standard Name/

Number Caller ID Service to know who is calling when the

phone rings and Call Waiting Caller ID Service to know who is

calling while you are on the phone.

INSTALLATION NOTE: Some cordless telephones operate at

frequencies that may cause interference to nearby TVs, microwave

ovens, and VCRs. To minimize or prevent such interference, the

base of the cordless telephone should not be placed near or on top

of a TV, microwave ovens, or VCR. If such interference continues,

move the cordless telephone farther away from these appliances.

Certain other communications devices may also use the 2.4 GHz

frequency for communication, and, if not properly set, these

devices may interfere with each other and/or your new telephone.

Typical devices that may use the 2.4 GHz frequency for

communication include wireless audio/video senders, wireless

computer networks, multi-handset cordless telephone systems, and

some long-range cordless telephone systems.

HANDSET AND CHARGE CRADLE LAYOUT

BEFORE YOU BEGIN

PARTS CHECKLIST

Make sure your package includes the items shown here.

Handset

Handset battery packBelt Clip

wxyz

mno

def

tuv

jkl

abc

pqrs

ghi

oper

pause

tone

ringerpage

flash

redial

format

mute

mem

exit

talk

deleteint

erase

conference

answerer

program

play/stop

skipreview

charge

Handset charge cradle

INSTALLING THE PHONE

IMPORTANT: Make sure the extra handset is registered

on GE Model 21025 and Model 21095 before use. Refer

to the GE 21025 or 21095 instruction book for detailed

installation and operation information.

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

• Never touch non-insulated telephone wires or terminals, unless

the telephone line has been disconnected at the network

interface.

• Use caution when installing or modifying telephone lines.

•Temporarily disconnect any equipment connected to the phone

such as faxes, other phones, or modems.

IMPORTANT INSTALLATION GUIDELINES

• Install telephone near an electrical power outlet.

•Avoid sources of noise, such as a window by a busy street, and

electrical noise, such motors, microwave ovens, and fluorescent

lighting.

•Avoid heat sources, such as heating air ducts, heating appliances,

radiators, and direct sunlight.

•Avoid areas of excessive moisture or extremely low temperature.

•Avoid dusty locations.

•Avoid other cordless telephones or personal computers.

CONNECTING THE AC (ELECTRICAL) POWER

1. Plug the charge cradle power supply into an electrical outlet.

2. Place the handset in charge cradle. The charge indicators turn on

to indicate the batteries are charging.

INSTALLING THE HANDSET BATTERY

NOTE: You must connect the handset battery before use.

1. Push down on the top of the battery compartment cover (located

on the back of each handset) and remove the cover.

2. Lift the battery pack and connect it's plug to the jack inside the

compartment.

NOTE: It is important to maintain the polarity (black and red

wires) to the jack inside the compartment as shown in the

illustration.

BLACK WIRE

RED WIRE

BATTERY

PRESS DOWN

FIRMLY

HANDSET NEEDS

REGISTRATION

HOLD BASE PAGE

WAIT FOR BEEP

HANDSET #

REGISTERED

HANDSET NAME

HANDSET NEEDS

REGISTRATION

1 2

Résumé du contenu

Page 1 - REGISTERED

Extra Handset and Recharge Cradlewith Call-Waiting Caller ID for Use withModels 21025 and 21095User’s GuideEQUIPMENT APPROVAL INFORMATIONYour telephon

Page 2 - CCESSORY

3. Press touch-tone pad to enter 1YES or 2NO, or use cid /vol ( or) to scroll to 1YES or 2NO. If yes, then MOVE NEAR TO BASEdisplays until the hands

Modèles reliés 16272270

Commentaires sur ces manuels

Pas de commentaire

Ge 21002 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléphone sans fil à combiné Ge 21002. GE 21002 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 16272270

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphone sans fil à combiné Ge 21002