Ge 25839 Manuel d'utilisateur télécharger pdf

VOLUME

When the phone is ON (in TALK mode) press the Caller ID/vol (- or +)

button to adjust the listening level. Choose from four volume settings.

VOL 1 is the lowest volume and VOL 4 is the highest volume.

MUTE

Use mute during a phone conversation to speak privately and off-line

with a third party.

1. Press the mute button.

MUTE

shows in the display. The party on the

telephone will not hear you.

2. Press the mute button when finished.

CALLER ID (CID)

This unit receives and displays information transmitted by your local

phone company. This information can include the phone number, date,

and time; or the name, phone number, date, and time. The unit can store

up to 40 calls for later review.

5. Plug the AC power adaptor into the electrical outlet and the DC

connector into the jack on the bottom of the base.

6. Place the handset in the base cradle. The charge/in use indicator

turns on, verifying the battery is charging.

7. Allow the phone to charge for 12 hours prior to first use. If you

don't properly charge the phone, battery performance is

compromised.

CAUTION: Use only the ATLINKS USA, Inc. 5-2677 (black)

power adaptor that came with this unit. Using other power

adaptors may damage the unit.

NOTE :

The phone is tone dial only and does not support pulse dial mode.

WALL MOUNTING

1. Choose an area near an electrical outlet and a telephone wall jack

(RJ11C), and place your cordless telephone on a level surface, such

as a desktop or tabletop, or you may mount it on the wall.

2. Install the handset battery.

CAUTION: To reduce the risk of fire or personal injury, use

only the battery 5-2459, which is compatible with this unit.

NOTE: You must connect the handset battery before use.

• Plug the battery pack cord into the jack located inside the battery

compartment, then place the battery pack inside the battery

compartment.

• Put the battery compartment door back on.

3. Plug one end of the telephone line cord into the TEL LINE jack on

the bottom of the base and the other end into a modular jack.

4. Set the RINGER switch (on the handset) to ON.

5.8 GHz Call Waiting Caller ID

Cordless Telephone

User's Guide

25839

EQUIPMENT APPROVAL INFORMATION

Your telephone equipment is approved for connection to the Public

Switched Telephone Network and is in compliance with parts 15 and 68,

FCC Rules and Regulations and the Technical Requirements for Telephone

Terminal Equipment published by ACTA.

1 Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other

information, the US number and Ringer Equivalence Number (REN) for

the equipment. You must, upon request, provide this information to

your telephone company.

The REN is useful in determining the number of devices you may

connect to your telephone line and still have all of these devices ring

when your telephone number is called. In most (but not all) areas, the

sum of the RENs of all devices connected to one line should not exceed

5. To be certain of the number of devices you may connect to your line

as determined by the REN, you should contact your local telephone

company.

A plug and jack used to connect this equipment to the premises wiring

and telephone network must comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA. A compliant telephone

cord and modular plug is provided with this product. It is designed to

be connected to a compatible modular jack that is also compliant. See

installation instructions for details.

BEFORE YOU BEGIN

PARTS CHECKLIST

Make sure your package includes the items shown here.

TELEPHONE JACK REQUIREMENTS

To use this phone, you need an RJ11C type

modular telephone jack, which might look like the

one pictured here, installed in your home. If you

don’t have a modular jack, call your local phone

company to find out how to get one installed.

DIGITAL SECURITY SYSTEM

Your cordless phone uses a digital security system to protect against

false ringing, unauthorized access, and charges to your phone line.

When you place the handset in the base, the unit verifies its security

code. After power outage or battery replacement, you should place the

handset in the base for about 20 seconds to reset the code.

INSTALLATION NOTE: Some cordless telephones operate at

frequencies that may cause or receive interference with TVs,

microwave ovens, and VCRs. To minimize or prevent such

interference, the base of the cordless telephone should not be placed

near or on top of a TV, microwave ovens, or VCR. If such interference

continues, move the cordless telephone farther away from these

appliances. Certain other communications devices may also use the

5.8 GHz frequency for communication, and, if not properly set, these

devices may interfere with each other and/or your new telephone. If

you are concerned with interference, please refer to the User’s Guide

for these devices on how to properly set channels to avoid

interference. Typical devices that may use the 5.8 GHz frequency for

communication include wireless audio/video senders, wireless

computer networks, multi-handset cordless telephone systems, and

some long-range cordless telephone systems.

INSTALLATION

IMPORTANT INSTALLATION GUIDELINES

• Avoid sources of noise and heat, such as motors, fluorescent

lighting, microwave ovens, heating appliances and direct sunlight.

• Avoid areas of excessive dust, moisture and low temperature.

• Avoid other cordless telephones or personal computers.

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is

specifically designed for wet locations.

• Never touch non-insulated telephone wires or terminals, unless the

telephone line has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

INSTALLING THE PHONE

1. Slip the mounting holes (on the back of the base) over the wall plate

posts, and slide the unit down into place. (Wall plate not included.)

2. Place the handset on the base cradle.

SET UP

There are four programmable menus available: Language, Area Code,

Ringer Tone, and Default Setting.

During programming, you may press the flash/prog button at any time

to go to the next option. To exit the menu, keep the previous setting

and return to the standby mode, press the *exit button.

DISPLAY LANGUAGE

1. Press the flash/prog button until

>1ENG 2FRA 3ESP

shows in the

display.

“1ENG”

is the default.

2. Use the Caller ID/vol (- or +) button or the touch-tone pad on the

handset to enter your selection.

3. Press flash/prog again to save.

LOCAL AREA CODE

1. Press the flash/prog button until

AREA CODE - - -

shows in the

display. “

- - -”

is the default.

2. Use the touch-tone pad on the handset to enter your three digit area

code.

3. Press flash/prog again to save.

NOTE: If you make a mistake, press the del/chan button to erase

a wrong number.

RINGER TONE

1. Press the flash/prog button until

RINGER TONE



shows in the

display.

“1”

is the default.

2. Use the Caller ID/vol (- or +) button or the touch-tone pad on the

handset to scroll to

1, 2, or 3

3. Press flash/prog to save.

DEFAULT SETTING

1. Press the flash/prog button until

DEFAULT



shows in the

display.

“NO”

the default.

2. Use the Caller ID/vol (- or +) button on the handset to scroll

YES

3. Press flash/prog to save. You will hear a confirmation tone.

CORDLESS PHONE BASICS

CHARGE/IN USE INDICATOR

The phone is ON when the talk/end/call back indicator on the handset

and the charge/in use indicator on the base is lit. The handset and

base indicators flash when you receive a call.

ANSWERING A CALL

1. When the phone rings, pick up the handset and press the talk/end/call

back button.

2. When finished, press the talk/end/call back button or place the

handset on the base cradle to hang up.

MAKING A CALL

1. Pick up the handset and press the talk/end/call back button. Wait for

the dial tone. The call timer starts counting minutes and seconds in

the display.

2. Dial a telephone number.

3. When finished, press the talk/end/call back button again or place the

handset on the base cradle to hang up.

PRE-DIALING

1. Make sure the phone is OFF (not in TALK mode).

2. Dial a telephone number (the number you dial shows in the

display).

NOTE: If you make a mistake dialing the number, use the del/chan

button to backspace and erase the wrong number, and enter the

correct number.

3. Press the talk/end/call back button on the handset. The number

automatically dials and the call timer starts counting the minutes

and seconds in the display.

4. When finished, press the talk/end/call back button again to hang up.

NOTE : You may enter up to 32 pre-dial digits.

REDIAL

While the phone is ON (in TALK mode), press the redial button to

redial the last number you dialed (up to 32 digits).

- OR -

While the phone is OFF (in standby mode), press the redial button and

then the talk/end/call back button to redial the last number.

FLASH

Use the flash/prog button to activate custom calling services such as

call waiting, which are available through your local phone company.

TIP: Don’t use the talk.end/call back button to activate custom calling

services such as call waiting, or you’ll hang up the phone.

CHANNEL BUTTON

While talking on the phone, it may be necessary for you to manually

change the channel to improve reception and reduce noise or static on

the line. Press and release the del/chan button to move to the next

clear channel.

EXIT

Press the *exit button to cancel any command you initiated.

FINDING THE HANDSET

This feature helps locate a misplaced handset.

Press the page button on the base. The handset beeps continuously

for about 2 minutes until you press the talk/end/call back button on the

handset or the page button on the base.

NOTE: You may still page the handset when the ringer is off.

RINGER SWITCH

The ringer switch is located on the side of the handset, it has two

positions, On and Off.

CALL WAITING CALLER ID

Provided you subscribe to Call Waiting Caller ID service from your

phone company, you are able to see who is calling while you are on

the phone when you hear the call waiting beep. The caller identification

information appears in the display after you hear the tone.

• When you hear the call waiting beep in the handset receiver, press

the flash/prog button to put the current call on hold and answer the

incoming call.

IMPORTANT: In order to use this unit’s Caller ID features, you must

subscribe to either the standard Name/Number Caller ID Service or

Call Waiting Caller ID Service. To know who is calling while you are on

the phone, you must subscribe to Call Waiting Caller ID Service.

RECEIVING AND STORING CID RECORDS

When you receive a call, the information is transmitted by the phone

company to your Caller ID telephone between the first and second

ring.

When the memory is full, a new call automatically replaces the oldest

call in memory.

NEW

appears in the display for calls received that

have not been reviewed.

NOTE: Check with your local phone company regarding name service

availability.

REVIEWING CID RECORDS

As calls are received and stored, the display is updated to let you

know how many calls have been received.

• Press the Caller ID/vol (-) to scroll through the call records from the

most recent to the oldest.

• Press the Caller ID/vol (+) to scroll through the call records from

the oldest to the newest.

TRANSFERRING CALLER ID RECORDS IN

MEMORY

1. Make sure the phone is OFF (in standby mode).

2. Press the Caller ID/vol (- or +) button to scroll to the desired caller ID.

3. Press the mem button.

4. Press a number key (0 - 9) to store the number in that memory

location. You will hear a confirmation tone.

NOTE: It is important that you format the caller ID records

correctly before storing in memory. It is not possible to re-format

caller ID records stored in memory.

INTRODUCTION

CAUTION: When using telephone equipment, there are basic

safety instructions that should always be followed. Refer to the

IMPORTANT SAFETY INSTRUCTIONS provided with this

product and save them for future reference.

Your Call Waiting Caller ID phone stores and displays specific

information, provided by your local telephone company, to

subscribers of Caller ID or similar caller identification services.

Your Call Waiting Caller ID phone enables you to:

• Identify callers before you answer the phone.

• View the time and date of each incoming call.

• Record up to 40 Caller ID messages sequentially.

• Know who called while you were away.

To get the most from your new phone, we suggest that you take a

few minutes right now to read through this user's guide.

IMPORTANT: In order to use all of the features of this unit, you must

subscribe to either the standard Name/Number Caller ID Service or

the phone, you must subscribe to Call Waiting Caller ID Service.

IMPORTANT: Because cordless phones operate on electricity, you

should have at least one phone in your home that isn’t cordless, in

case the power in your home goes out.

ATLINKS USA, Inc.

101 West 103rd Street

Indianapolis, IN 46290

Trademark(s) ® Registered

Marca(s) Registrada(s)

Model 25839

00003988 (Rev. 1 Dom E)

05-20

Printed in China

HANDSET AND BASE LAYOUT

Base

Handset

Belt clip

Line cord

AC power

adaptor

Handset

battery

Modular

telephone

line jack

Wall plate

SEE MARKING ON BOTTOM / BACK OF PRODUCT

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO

PREVENT FIRE OR

ELECTRICAL SHOCK

HAZARD, DO NOT

EXPOSE THIS

PRODUCT TO RAIN

OR MOISTURE.

THE LIGHTNING

FLASH AND ARROW

HEAD WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

“DANGEROUS

VOLTAGE” INSIDE

THE PRODUCT.

CAUTION: TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE

PERSONNEL.

THE EXCLAMATION

POINT WITHIN THE

TRIANGLE IS A

WARNING SIGN

ALERTING YOU OF

IMPORTANT

INSTRUCTIONS

ACCOMPANYING

THE PRODUCT.

CAUTION:

Battery

compartment

door

Notes

• This equipment may not be used on coin service provided by the

telephone company.

• Party lines are subject to state tariffs, and therefore, you may not be

able to use your own telephone equipment if you are on a party line.

Check with your local telephone company.

• Notice must be given to the telephone company upon permanent

disconnection of your telephone from your line.

• If your home has specially wired alarm equipment connected to the

telephone line, ensure the installation of this product does not

disable your alarm equipment. If you have questions about what will

disable alarm equipment, consult your telephone company or a

qualified installer.

2 Rights of the Telephone Company

Should your equipment cause trouble on your line which may harm the

telephone network, the telephone company shall, where practicable, notify

you that temporary discontinuance of service may be required. Where prior

notice is not practicable and the circumstances warrant such action, the

telephone company may temporarily discontinue service immediately. In

case of such temporary discontinuance, the telephone company must: (1)

promptly notify you of such temporary discontinuance; (2) afford you the

opportunity to correct the situation; and (3) inform you of your right to

bring a complaint to the Commission pursuant to procedures set forth in

Subpart E of Part 68, FCC Rules and Regulations.

The telephone company may make changes in its communications

facilities, equipment, operations or procedures where such action is

required in the operation of its business and not inconsistent with FCC

Rules and Regulations. If these changes are expected to affect the use or

performance of your telephone equipment, the telephone company must

give you adequate notice, in writing, to allow you to maintain uninterrupted

service.

LICENSING

Licensed under US Patent 6,427,009

HEARING AID COMPATIBILITY (HAC)

This telephone system meets FCC standards for Hearing Aid Compatibility.

US NUMBER IS LOCATED ON THE CABINET BOTTOM

REN NUMBER IS LOCATED ON THE CABINET BOTTOM

headphone jack

display

talk/end/call back

(button)

Caller ID/vol -

(caller ID/volume down

button)

Caller ID/vol +

(caller ID/volume

up button)

del/chan

(delete/channel button)

redial

(button)

* exit

(button)

# pause

(button)

flash/prog

(button)

mute

(button)

mem

(memory button)

format

(button)

page

(button)

charge/in use

(indicator)

Time

Date Number of calls

Caller ID name

Caller ID phone number

TO REPLACE AN OLD MEMORY WITH A NEW CID

RECORD

1. Repeat steps 1 through 4 in Transferring Caller ID Records in

Memory. After you enter the memory location,

REPLACE MEMO?

shows in the display.

2. Press the mem button again, and the new CID record replaces the

old memory in that location. You will hear a confirmation tone.

DELETING THE CURRENT CID RECORD

1. Make sure the phone is OFF (not in TALK mode).

2. Use the Caller ID/vol (- or +) button to scroll to the desired record.

3. Press del/chan. The display shows

DELETE CALL ID?

4. Press del/chan again to erase the record and the next Caller ID

record shows in the display. You will hear a confirmation tone.

DELETING ALL CID RECORDS

1. Make sure the phone is OFF (not in TALK mode).

2. Use the Caller ID/vol (- or +) button to display any Caller ID record.

3. Press and hold the del/chan button until

DELETE ALL?

shows in the

display.

4. Press del/chan again to erase all records. You will hear a

confirmation tone. The display shows

NO CALLS

DIALING A CALLER ID NUMBER

1. Make sure the phone is OFF (not in TALK mode).

2. Use the Caller ID/vol (- or +) button to display the desired record.

3. Press talk/end/call back. The number dials automatically.

CHANGING THE TELEPHONE NUMBER FORMAT

The format button lets you change the format of the displayed

telephone number. The available formats are as follows.

7-digit 7-digit telephone number.

10-digit 3-digit area code + 7-digit telephone number.

11-digit long distance code “1” + 3-digit area code + 7-digit

telephone number.

1. Use the Caller ID/vol (- or +) button to scroll to the number you want

to call back.

2. Press talk/end/call back. The number dials automatically.

NOTE: If the telephone number cannot be dialed, press the format

button to adjust the number, and try again.

MEMORY

Store up to ten 24-digit 15-character numbers in memory for quick

dialing. This memory feature is in addition to the CID memory log, which

stores up to 40 CID records.

STORING A NAME AND NUMBER IN MEMORY

1. Make sure the phone is OFF (not in TALK mode).

2. Press the mem button.

3. Press the desired memory location (0 through 9) or use Caller ID/

vol (+ or -) to scroll to the desired memory location.

NOTE: If the memory location is occupied, the memory location

number and its contents show in the display.

4. Press the mem button again. The display shows

ENTER NAME

NOTE: If you don't want to enter the name, skip step 5.

5. Use the touch-tone pad on the handset to enter the name (up to 15

characters) and press the mem button to save. More than one letter is

stored in each of the number keys. For example, to enter the name Bill

Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for

the letter I. Press the 5 key 3 times for the letter L. Wait for one second.

Press the 5 key 3 times for the second letter L. Press the 1 key to insert

a space between the L and the S. Press the 7 key 4 times for the letter

S; press the 6 key once for the letter M; press the 4 key 3 times for the

letter I; press the 8 key for the letter T; press the 4 key twice for the

letter H.

6. Press the mem button to save the name. The display shows

ENTER TEL

NUMBR

1 2

Résumé du contenu

Page 1 - DELETING ALL CID RECORDS

VOLUMEWhen the phone is ON (in TALK mode) press the Caller ID/vol (- or +)button to adjust the listening level. Choose from four volume settings.VOL 1

Page 2 - LIMITED WARRANTY

7. Use the touch-tone pad to enter the telephone number you want tostore (up to 24 digits).8. Press mem again to store the number. You will hear a con

Commentaires sur ces manuels

Pas de commentaire

Ge 25839 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Téléphone sans fil à combiné Ge 25839. GE 25839 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphone sans fil à combiné Ge 25839