GE ZDIC150 Manuel d'utilisateur télécharger pdf (Page 10)

Care and Cleaning

Ice maker

Cleaning

cycle

For best performance, perform a cleaning cycle

every six months. Nickel Safe Ice Machine Cleaner

by Nu Calgon is available at appliance repair

shops, or through GE Parts and Accessories. Order

part number WX08X42870. In the U.S.A., call

1.800.626.2002 or visit GEApplianceParts.com. In

Canada, call 1.800.561.3344. To clean ice maker

system, follow these instructions.

1. Turn ice production off. Remove all ice from

storage bin.

 To improve accessibility, remove cutter grid

cover by pulling bottom of cover down and

then forward.

3. Unscrew the drain cap from the bottom of the

water reservoir. Drain all water in reservoir.

4. Replace the drain cap securely.

NOTE: If the cap is not securely tightened, water

can leak, causing thin ice or no ice.

5. Pour the entire 16 oz. bottle of Nickel Safe Ice

Machine Cleaner into water reservoir. Follow all

safety precautions on the bottle. Fill the bottle

twice with tap water and pour it into the water

reservoir.

6. Replace the cutter grid cover. Insert the top

tabs first, and then push toward cutter grid to

snap into place.

7. Touch the &/($1 button. The &/($1 LED will

illuminate and the cleaning cycle will begin. If

Invalid Tone plays, press the ON/OFF button

to turn the ice maker off and try again. If "ADD

CLEANER" illuminates, see previous steps.

8. When the cycle is complete the &/($1 LED will

turn off, the Cycle Complete tone will sound,

and the “CLEANING DONE” text will illuminate.

9. After the cleaning cycle is complete, remove the

drain cap from the water reservoir to see if any

of the green cleaning solution is left in the water

reservoir. If cleaning solution drains from the

water reservoir, you should run the clean cycle

again adding only tap water to the reservoir.

Be sure to replace the drain cap before running

the cycle again.

NOTE: Severe scale buildup may require repeated

cleaning with a fresh quantity of cleaning solution.

10.Press the ON/OFF button to resume ice

production. Discard the first batch of ice.

NOTE: To stop the cleaning cycle prematurely,

press ON/OFF. The &/($1 LED will turn off and

you will hear the Power Off tone. If power is lost

before cycle is complete, cleaning will continue

when the ice maker powers on.

CLEAN

CLEANING DONE

CLEANING NEEDED

ADD CLEANER

TURN UNIT OFF BEFORE CLEANING

SEE USE AND CARE MANUAL

Water

reservoir

Drain

cap

Cutter

grid

cover

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

GE ZDIC150 Manuel d'utilisateur Page 10

Commentaires sur ces manuels