GE BL Series Guide d'installation télécharger pdf (Page 3)

Connect the accessory kit to the through wiring.

Push wires into xture.

Snap in the terminal block to the factory mounted

holder. Be careful not to break the wires at a high

angle when pushing them inside the housing.

Through wiring

Luminaire Installation

With the supplied universal bracket the product

is compatible with the following USG type grids:

DX, DXI, DXT, DXF, DXM.

Reference diagram (right) to determine which

hole to use for a given grid.

Safety screw holes.

One is needed,

more are optional.

DXT(F)

DXI

DXF

DXT(F)

DXM/

DXT(G)

DXM/

DXT(G)

Preliminary Electrical Connections

Loosen cable gland nuts to insert AC line. Optionally,

insert dimming line into smaller cable gland.

Connect the AC line and dimming wires to the

terminal block of the line-in connector accessory:

Black to L1, White to N, Green/yellow to ground,

Grey to D1 and Violet to D2 for 1-10V or Orange to

D1 and Violet to D2 for DALI.

Note: Use BL Series CE Continuous Leader Cable (1-

10V) SKU 85601 or BL Series CE Continuous Leader

Cable (DALI) SKU 85675.

First unit only

AC line

Dimming line

(optional)

Line-in connector

accessory

Black

White

Green/yellow

Grey or Orange

Violet

Terminal block

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

GE BL Series Guide d'installation Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour motos GE BL Series