GE BL Series Guide d'installation télécharger pdf (Page 5)

Plug together wires between luminaires.

Join mounting brackets together with M4 hex head

screw and nut. Also tighten wingnuts.

Carefully align pins of one luminaire with grooves of

next luminaire, then push them completely together,

taking care not to pinch wires.

Note: A rubber mallet may be required to complete

this step. Hammer the luminaires only on the top

edge, not the bottom.

For added safety, use additional ceiling grid screws

to permanently x brackets to grid.

One safety screw per

bracket is mandatory,

additional screws are

optional

WARNING

Risk of Injury. Improper mounting bracket installation

may cause injury or property damage.

Diffuser Installation

1A 1B

Option B - two diffusers (primary and anti-glare):

Tilt and slide both diffusers into base of luminaires,

making sure the diffuser with the green protective

lm is placed on the bottom (remove lm rst). The

last diffusers will need to be trimmed (see Step 2).

Option A - one diffuser (primary): Tilt and slide

diffusers into base of luminaires. The last diffuser

will need to be trimmed (see Step 2).

Bottom: Anti-glare diffuser

with green lm faces up

(remove lm before sliding in)

Primary diffuser

Top: Primary diffuser with no lm

1 2 3 4 5 6

Pas de commentaire

GE BL Series Guide d'installation Page 5