Ge ZIFS240PSS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Réfrigérateurs Ge ZIFS240PSS. GE ZIFS240PSS User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Specification Created 3/04
120032
ZIFI240PII GE Monogram Fresh-Food Refrigerator Module
(Custom panel required)
ZIFS240PSS – GE Monogram Fresh-Food Refrigerator Module
(Stainless steel)
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call GE Answer Center
®
service, 800.626.2000.
R
Listed by
Underwriters
Laboratories
Dimensions and Specifications (in inches)
Installation Space
The cutout depth must be 24"
The cutout dimensions shown allow for a full door swing and access
to the pull-out racks when installed as a built-in.
The Fresh-Food Refrigerator can be free-standing.
The stainless steel model ZIFS240PSS can be installed flush with
standard cabinetry. ZIFI240PII with custom panel will project
forward 1-3/4" of adjacent 24" deep base cabinets.
Note: Door swing is not reversible.
Additional Specifications:
A 120 volt 60Hz., 15 or 20 amp power supply is required. An
individual property grounded branch circuit or circuit breaker is
recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall as shown. Electrical
must be located on rear wall as shown.
Note: GFI (ground fault
interrupter) is not recommended.
34-1/2"-35"
24" Min.
23-3/4"
34-1/2"
23-3/4" Stainless Steel
Models
24-7/8" Framed Models
1-1/2"
Locate Outlet
9"
Max.
10-1/2"
Depth Including
Handle:
26" Stainless Steel
Models Only
23-3/4" Min.
Note: If installing between frameless
cabinets, a 1/2" wide filler strip or side panel
may be required. The filler strip will act as a
spacer between the door case and adjacent cabinet
and will prevent interference with cabinet door swing.
The width of the opening must include filler panels.
Product Clearances
16" Minimum
110˚
Wall
24"
Cabinet
14" Minimum
110˚
Wall
24"
Cabinet
All models are factory set for a 110° door swing.
For a minimum 90° door swing:
Allow 4" min. clearance to wall on the hinge side for Stainless
Steel models.
Allow 4-1/2" min. clearance to wall on the hinge side for models
with a custom panel and custom handle
.
For a full 110° door swing:
Allow 14" min. clearance to wall on the hinge side for Stainless
Steel models.
Allow 16" min. clearance to wall on the hinge side for models with
a custom panel and custom handle.
Stainless Steel
Models
Models with a Custom
Door Panel
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - (Stainless steel)

Specification Created 3/04120032ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module (Custom panel required)ZIFS240PSS – GE Monogram Fresh-Food

Page 2 - 3/4” Overlay Panel Dimensions

Specification Created 3/04120032ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module (Custom panel required)ZIFS240PSS – GE Monogram Fresh-Food

Page 3 - ZIFS240PSS

Specification Created 3/04120032Features and Benefits• Electronic adjustable temperature control – Offers a range of temperatures for precise chillin

Modèles reliés ZIFI240PII

Commentaires sur ces manuels

Pas de commentaire