Ge 24999 Manuel d'utilisateur

Universal Remote Instruction Manual24999

10System Setup OptionsPressing OK at the SYSTEM SETUP screen accesses the System Setup Options for Volume Punch-Through control Setup, Time Setu

11 Setup, cont.Resetting Volume/Mute Control to Factory Defaults (VOL/MUTE RESET) This resets Volume/Mute control back to its Factory default setting

12Setting the Time of Day (TIME SETUP) To set the Time of day for normal LCD time display. 1. Press and hold the SETUP button until CODE SETUP is disp

13 Setup, cont.Setting the Backlighting On time (BACKLIGHT SETUP) To set the length of time the Backlighting remains on after you stop pressing butto

14 Setup, cont.Timer SetupPressing OK at TIMER SETUP accesses the available Timer Options. These are a TV Sleep Timer and 4 Timers that can send a se

15 Setup, cont.To set a Timer (Note, the Timer must be cleared first if it was previously set – see To Clear a Timer below)1. Press and hold the SETU

16 Code LearningTips On LearningYou can only learn one device type under any one Mode button e.g. only learn TV codes under the TV Mode, DVD codes un

17Tips On Learning, cont.m. If learning the first or second buttons for a Mode results in continuous errors then try the following:i. End the Learn s

181. Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.2. Press the down navigat

19To Clear all Learned Commands under a modeClearing learned commands is helpful if, for example, you replace your CD player with another brand or mod

2 Table of ContentsIntroduction ...

20 TroubleshootingRemote does not operate your product.• Press the mode button of the product you want to control.• Program the remote with a new cod

21Universal Remote Instruction Manual24999-12/1024999Jasco Products Company10 E. Memorial RoadOklahoma City, OK 73114-2205Made in China

3 IntroductionCongratulations on your purchase of this 24999 Universal Remote Control. It is one of the most unique looking, and easy to use remote c

4Note: The REC button must be pressed TWICE to record from your device. For some brands of VCRs, you might need to press the REC button once, then pre

5 Button Functions, cont.1. Liquid Crystal Display (LCD): Helps with setup and displays the Mode the remote is in, and time, etc.2. SETUP: Used for

6Battery Installation1. On the back of the remote, push down on the tab and lift the cover off.2. Match the batteries to the + and - marks inside the

7 Setup, cont.Setup Screen Navigation Use the SETUP, OK, and Up, Down, Left and Right navigation buttons for Setup screen navigation and selection. T

8 Code EntryCode Setup Options: Pressing OK at the CODE SETUP screen presents 3 options for programming a Mode with codes. These are LIST CODES (let

9Searching for CodesIf your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching