Ge 19200 GE Portable Wireless Seven-Sound Chime Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Ge 19200 GE Portable Wireless Seven-Sound Chime. GE 19200 GE Portable Wireless Seven-Sound Chime User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 9
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
GE Model 19200
www.jascoproducts.com
Wireless Portable Chime
Installation Instructions for Wireless Portable
Door Chime Kit
Required Tools: Small flat blade screwdriver, drill, drill bit, and phillips
screwdriver.
Included Hardware:
(2) 3x20mm screws
(2) Double sided adhesive pads
The portable wireless door chime Kit has two components:
Portable Chime (receiver) Push-Button (Transmitter).
How To Install The Batteries
1. On the bottom of the portable chime you will find a round battery release
tab. Push the tab inward and slide the cover in the direction of the arrow.
The battery cover will slide off.
Vue de la page 0
1 2 3 4 5 6 7 8 9

Résumé du contenu

Page 1 - Wireless Portable Chime

GE Model 19200 www.jascoproducts.com Wireless Portable Chime Insta

Page 2 - Chime Tune Setting

Battery Release Tab 2. Install 4 C-cell batteries (we recommend Alkaline Batteries) 3. Remove back of wireless push button and install the 12-vo

Page 3

and 9=off.) 3. Select the desired chime sound from the table below. Chime Sound Table Position 7 8 9 Westminster ON OFF OFF Ding Dong OFF ON

Page 4

Each component has jumpers for setting the house security code: The chime and pushbutton must be set to the same house security code for the c

Page 5

3. Locate the House Security Code door and screw located on the back of the AC Chime. Remove the screw and take off the door. 4. Locate the chime

Page 6

b. Replacing the back cover 1. Push buttons are typically mounted at the same height as the door knob or handle (between 36" and 44

Page 7

Not farther than 150 feet 3. Place the push button where you would like to mount it and with the chime as close to its final position as poss

Page 8 - Troubleshooting

7. Press front housing onto back cover. 8. Test operation. If the chime does not work, see TROUBLESHOOTING. Operation 1. Slide power switch to “H

Page 9

For technical support contact Jasco Products Company at 1-800-654-8483 or www.jascoproducts.com Made in China is a trademark of General Ele

Commentaires sur ces manuels

Pas de commentaire