Ge PGP990SENSS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Poêles Ge PGP990SENSS. GE PGP990SENSS User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 3
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Listed by
Underwriters
Laboratories
For answers to your Monogram
®
or GE
®
appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
Specification Revised 3/13
230283
Wall Installation: Wall installations require 25” countertop
depth. When
cabinet is flush against the wall, the fan housing can be rotated to the
horizontal position for direct venting through rear wall. Make a countertop
cutout in the range cabinet according to unit dimensions and installation
type. Duct hole is positioned in back of cabinet for through-the-wall ducting.
Requires special offset adapter JXRW89.
Peninsula or Island Installation: For peninsula/islands a minimum
26”
countertop
depth is suggested. Blower should be in vertical position.
Island or peninsula cabinets may require adjustment in cutout depth and/or
location within the width dimensions. Duct hole is positioned in bottom of
cabinet for island or peninsula installation.
Slab Installation: For peninsula or island installation
and rear wall ducting, 6” PVC duct or locally approved piping
should be used if installing under a poured concrete slab.
Installation Information: Before installing, consult installation instructions,
packed with product, for current dimensional data.
Note: These cooktops are approved for indoor use only.
Warranty Information:
Parts Warrany - Limited 1-year entire appliance
Labor Warranty - Limited 1-year entire appliance
Warranty Notes - For models produced on or after January 1, 2006;
see written warranty for full details
Tie down bolt
on each end
Select appropriate
duct cutout
(see ducting installation instructions).
Pressure regulator
Wiring box cover
Grease
container
9-1/2
29
±
1/16
1-7/8"
Min.
15/16"
Min.
clearance
Blower can be swiveled 90°
14-3/16
9
30
21-3/4
21
±
1/16
PGP990SEN
GE Profile
Series Built-In Downdraft Gas Cooktop
Dimensions and Installation Information (in inches)
Vue de la page 0
1 2 3

Résumé du contenu

Page 1 - PGP990SEN

Listed by Underwriters LaboratoriesFor answers to your Monogram® or GE® appliance questions, visit our website at geappliances.com or call GE Answer

Page 2

Listed by Underwriters LaboratoriesInstalling the Ductwork: Use galvanized or aluminum duct in 6” round or 3-1/4” x 10” size, or combination of both

Page 3

Features and Benefits• Modular Cooktop Options - Accepts optional Select-Top™ modules (left bay) • Two-Burner Gas Module - Shipped with unit (rig

Commentaires sur ces manuels

Pas de commentaire