GE V Guide d'installation télécharger pdf

StreetDreams

™

Glass Refractor — Vandermore Series

READ THOROUGHLY BEFORE INSTALLING

Save instructions for future use.

GENERAL

This luminaire is designed for outdoor lighting applications, and should not be used in areas of limited

ventilation, or in high ambient temperature enclosures.

Make all electrical connections in accordance with the National Electric Code and any applicable local

code requirements.

See Base instructions for proper installation instructions.

Use of safety glasses recommended during installation and maintenance.

IF SINGLE VOLTAGE:

All single voltage, tray mounted ballasts are pre-wired such that user need only connect the supply

conductors.

IF MULTIVOLT (120/208/240/277 volts):

Connect the tray mounted ballast lead with the insulated terminal to the desired voltage terminal as

indicated on the ballast terminal nameplate.

IF MULTI-WATT

Multiwatt ballasts are available in various combinations of wattage. See wiring instructions on wiring

tag inside the luminaire.

MOUNTING

WARNING

Risk of electric shock

• Turn power off before servicing

– see instructions

CAUTION

Unit will fall if not installed properly

• Follow installation instructions

GEH-5970A

INSTRUCTIONS

CAUTION

Risk of burn

• Allow lamp/fixture to cool before

handling

1. Place unit on 3” diameter x 3” long tenon.

2. Torque mounting set screws to 10-12 ft-lbs.

LAMP

Use only lamps specified on nameplate. Observe lamp manufacturer’s recommendations and

restrictions on lamp operation, particularly ballast type, burning position, etc.

Lamp Tightness: The lamp should be securely inserted to NEMA-EEI specified torque of 35 inch-

pounds, which is best achieved by very firm tightening to insure application of sufficient torque. Tightening

must be sufficient to fully depress and loadcenter contact of socket.

Lamp may be accessed by loosening thumb screw on top lid and opening. To close lid, collapse door

stay, bring lid down slowly, and retighten thumb screw.

MAINTENANCE

Clean external surfaces of glass globe by washing with mild non-abrasive detergent solution. Rinse

with clean water.

These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation or

maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, the matter should be referred

to GE Lighting Solutions.

Lighting Solutions

1 2

StreetDreams 1

Résumé du contenu

Page 1 - StreetDreams

StreetDreams™Glass Refractor — Vandermore SeriesREAD THOROUGHLY BEFORE INSTALLINGSave instructions for future use.GENERALThis luminaire is designed fo

Page 2

StreetDreams™Glass Refractor — Vandermore SeriesGEH-5970AINSTRUCTIONSLIRE ATTENTIVEMENT AVANT D'INSTALLERConserver ces instructions pour référenc