Ge 2-9975 Manuel d'utilisateur télécharger pdf (Page 11)

1. Press and hold the LINE 1 or LINE 2

ANNOUNCEMENT button. (You

need to hold the button until you

finish the announcement.)

2. Begin talking after you hear the

tone. You have 15 seconds to

complete the announcement.

3. Release the button when you finish

the announcement.

Default Outgoing Announcement

If you do not want to create your own outgoing announcement, you can

use the default announcement, Please leave message after tone. To use

the default announcement:

1. Press and hold the ANNOUNCEMENT LINE 1 or LINE 2 button.

2. Release the button when you hear the tone.

NOTE: The display will blink if you do not record an outgoing

announcement or choose the default announcement for each line. It

stops blinking once announcements are recorded for each line.

Reviewing An Outgoing Announcement

You can review an outgoing announcement by pressing and quickly

releasing the LINE 1 or LINE 2 ANNOUNCEMENT button.

Tape Backup

When you record the outgoing announcement, the tape also records

your announcement. In the event of a power failure, the unit automatically

re-records the announcement from the tape when power is restored.

/----------------------------------------------------------------------------------------------------------- \

TIP; For best sound quality of the outgoing announcement, re-record

the announcement if power is lost.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Pas de commentaire

Ge 2-9975 Manuel d'utilisateur Page 11