Ge 165 D3080P027 Manuel d'utilisateur télécharger pdf (Page 14)

The Problem Solver (continued)

PROBLEM

POSSIBLE CAUSE AND REMEDY

CHIPPING OF CHINA

Rough handling can cause chipping. Load with care. Make sure glassware and china

are secure and сапЧ jar ioose. (See page 8 for correct way to load glassware.) Make

sure tall glasses and stemware will clear the top of the tub when you push the rack into

the dishwasher.

Always use the top rack for delicate items.

SMALL AMOUNT OF

WATER STANDING

IN THE BOTTOM

OF THE TUB

Water around the outlet on the tub bottom at the back of the tub is normal. It is clean

water. It’s there to keep the water seal lubricated.

water WON’T PUMP

OUT OF THE TUB

If the entire bottom of die tub has water, you may have a drain problem. Clean the air

gap, if you have one. (See page 11.)

Check the kitchen sink. Is it draining well? %u may need a plumber.

If dishwasher drains into disposer, nm disposer to clear. Be sure disposer is not clogged.

SUDS IN THE TUB

Sudsing detergents are not meant for dishwashers. USE ONLY AUTOMATIC

DISHWASHER DETERGENTS TO AVOID SUDSING.

To remove suds from the tub: Open the dishwasher. Let suds evaporate. Add 1 gallon

of cold water to the tub. Close and latch the dishwasher. Pump out water by slowly

turning the control dial until a drain period is reached.

Repeat if necessary.

DISHWASHER LEAKS Suds can cause unit to overflow. That’s why it’s so important to use a detergent that’s

uesigiicd for iiUiuiiiatic dishwashers.

If you need more help,,, cal!, toll free:

The GE Answer Center®

800.626.2000

consumer Information service

1 2 ... 9 10 11 12 13 14 15 16

Pas de commentaire

Ge 165 D3080P027 Manuel d'utilisateur Page 14