Ge ZKD910SFSS Manuel d'utilisateur télécharger pdf (Page 11)

SECURE CUSTOM PANEL

TO METAL MOUNTING PANEL

• Lay the custom panel, appearance side down, on a

clean surface.

• Place the flat side of the metal panel onto the back

side of the custom panel, with the mounting flanges

facing up.

• Align the lamp hole in the panel with the mounting

panel.

• Check top, bottom and side overlap dimensions from

the metal panel to wood panel edge as shown.

3/16"

1/4"

7/32"

1/4"

Top

Bottom

Align Holes

Handle

Attachment Holes

FOR PANELS LESS

THAN 3/4” THICK

• Separate the custom panel and metal panel.

• Apply a few horizontal beads of adhesive to the metal

panel. Avoid adhesive within 1” of lamp hole area and

outer edges.

FOR 3/4” (OR GREATER)

THICK PANELS

3/4” thick panels may be secured to the metal panel

with screws.

• Use the metal panel as a template. Position the metal

panel over the back side of the custom panel and drill

pilot holes. Drill pilot holes sized to match screws being

used (screws not provided).

CAUTION: Select screw length carefully to

avoid penetration of the finished side.

INSTALL LAMP JEWEL

Turn the assembly appearance side up.

• Use plastic to wood adhesive to secure the lamp jewel

to the front of the wood panel. On the side with the

bulge, (see illustration) apply a small bead of adhesive

around the outside edge. Place the jewel into the

drilled hole.

Insert

Jewel

Appearance

Side

This Side

Against

Wood

REINSTALL ORIGINAL

HANDLE OR OPTIONAL

CUSTOM HANDLE

A custom handle (not supplied) may be installed.

• Drill pilot holes through the front of the custom panel

and through the metal panel to match the chosen

handle.

NOTE: The handle screws should be installed through

the metal panel, the custom panel and into the custom

or original handle.

INSTALL ASSEMBLED PANEL

TO THE DRAWER

• Install the custom panel assembly to the exposed

drawer front using the original 7 screws.

Back side of Appearance Panel with Support Panel

Installation

STEP 4

STEP 5

STEP 5A

STEP 6

STEP 7

STEP 8

Custom Handle

or Original Handle

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Ge ZKD910SFSS Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisine Ge ZKD910SFSS