Ge ZIFS240PLSS Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Réfrigérateurs Ge ZIFS240PLSS. GE ZIFS240PLSS User Manual Manuel d'utilisatio
- Page / 3
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module
(Custom panel required)
ZIFS240PSS – GE Monogram Fresh-Food Refrigerator Module
(Stainless steel)
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
GEAppliances.com or call GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
Dimensions and Specifications (in inches)
Installation Space
The cutout depth must be 24"
The cutout dimensions shown allow for a full door swing and access
to the pull-out racks when installed as a built-in.
• The Fresh-Food Refrigerator can be free-standing.
• The stainless steel model ZIFS240PSS can be installed flush with
standard cabinetry. ZIFI240PII with custom panel will project
forward 1-3/4" of adjacent 24" deep base cabinets.
• Note: Door swing is not reversible.
Additional Specifications:
• A 120 volt 60Hz., 15 or 20 amp power supply is required. An
individual property grounded branch circuit or circuit breaker is
recommended. Install a properly grounded 3-prong electrical
receptacle recessed into the back wall as shown. Electrical
must be located on rear wall as shown. Note: GFI (ground fault
interrupter) is not recommended.
34-1/2"-35"
24" Min.
23-3/4"
34-1/2"
23-3/4" Stainless Steel
Models
24-7/8" Framed Models
1-1/2"
Locate Outlet
9"
Max.
10-1/2"
Depth Including
Handle:
26" Stainless Steel
Models Only
23-3/4" Min.
Note: If installing between frameless
cabinets, a 1/2" wide filler strip or side panel
may be required. The filler strip will act as a
spacer between the door case and adjacent cabinet
and will prevent interference with cabinet door swing.
The width of the opening must include filler panels.
Product Clearances
16" Minimum
110˚
Wall
24"
Cabinet
14" Minimum
110˚
Wall
24"
Cabinet
All models are factory set for a 110° door swing.
For a minimum 90° door swing:
• Allow 4" min. clearance to wall on the hinge side for Stainless
Steel models.
• Allow 4-1/2" min. clearance to wall on the hinge side for models
with a custom panel and custom handle.
For a full 110° door swing:
• Allow 14" min. clearance to wall on the hinge side for Stainless
Steel models.
• Allow 16" min. clearance to wall on the hinge side for models with
a custom panel and custom handle.
Stainless Steel
Models
Models with a Custom
Door Panel
Specification Revised 7/05
120032
R
Résumé du contenu
Page 1 - (Stainless steel)
ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module (Custom panel required)ZIFS240PSS – GE Monogram Fresh-Food Refrigerator Module (Stainless
Page 2 - (Custom panel required) )
Specification Revised 7/05120032ZIFI240PII – GE Monogram Fresh-Food Refrigerator Module (Custom panel required) )ZIFS240PSS – GE Monogram Fresh-Fo
Page 3 - ZIFS240PSS
Specification Revised 7/05120032Features and Benefits• Electronic adjustable temperature control – Offers a range of temperatures for precise chillin
Plus de documents pour Réfrigérateurs GE ZIFS240PLSS
Ge ZIFS240PLSS Manuel d'utilisateur
(1 pages)
Ge ZIFS240PLSS Manuel d'utilisateur
(3 pages)
Produits connexes et manuels pour Réfrigérateurs Ge ZIFS240PLSS
(1 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.595 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels