Ge 51207 GE Wireless Motion Sensor Alarm with Keychai Manuel d'utilisateur télécharger pdf (Page 9)

Arming the Alarm

Point the remote control at the front of

the alarm and press the ARM button.

The alarm will sound a tone and the

red indicator light will ﬂash. There will

be a 45 second exit delay before the

unit is armed. The delay allows time

for you to leave the protected area

without triggering the alarm.

When motion is detected, the alarm

unit will sound a short tone and a red

light will ﬂash. The alarm will activate

in 30 seconds. The siren will sound

for 30 seconds (unless disarmed by

the remote) and then turn off. In 15

seconds the alarm will check for

motion. If motion is detected, the siren

will sound again. The cycle will repeat

until the unit is disarmed with the

remote.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Ge 51207 GE Wireless Motion Sensor Alarm with Keychai Manuel d'utilisateur Page 9