InstallationInstructions15” Built-In CompactorsGCG1500 BBGCG1500 WWGCG1580 SSGCG1700 II* ZCGP150 II*ZCGS150 SS*For ZCGP150 II and GCG1700 II,also refe
10Notes
11Notes
Pub. No. 31-30256-1206C1559P19609-09 JRPrinted in ChinaNOTE: While performing installations described in this book,safety glasses or goggles should be
Instructionsd’installationCompacteur intégré de 38 cm (15 po)GCG1500 BBGCG1500 WWGCG1580 SSGCG1700 II* ZCGP150 II*ZCGS150 SS*Pour ZCGP150 II et GCG170
Information sur la sécuritéMISE EN GARDE :Pour votre sécurité, retirez le fusible de la maison ou ouvrez le disjoncteur avantl’installation, pour évit
MODÈLES DISPONIBLESGCG1580 SSGCG1500 BBGCG1500 WWGCG1700 II* ZCGS150 SSZCGP150 II**Pour les modèles ZCGP150 II et GCG1700 II, reportez-vous aussi aux
4Planification préalableMODÈLES AVEC UN PANNEAU DE TIROIR PERSONNALISÉModèles ZCGP150 II et GCG1700 IILe panneau de tiroir et la poignée personnaliseé
Préparation de l’installationEXIGENCES ÉLECTRIQUES AVERTISSEMENT !SÉCURITÉ PERSONNELLE : retirez lesfusibles ou ouvrez le disjoncteur avant de commenc
Préparation de l’installationDÉBALLAGE DU COMPACTEUR1• Amenez le compacteur près de l’emplacement de l’installation.• Utilisez une section de la boîte
Préparation de l’installationMISE DE NIVEAU DU COMPACTEUR3• Le dessus du compacteur devrait être à au moins 0,31 cm (1/8 po) du dessus de l’ouverture
Safety InformationCAUTION:For personal safety, remove house fuse or opencircuit breaker before beginning installation toavoid severe or fatal shock in
• Utilisez deux vis n°8 x 11/16 po (1,8 cm) de longpour installer chaque fixation de retenue situéessur le dessus du compacteur au dessous ducomptoir.
9Installation• Agrippez les côtés du tiroir. Glissez avec soin le tiroir dans le compacteur.RÉINSTALLATION DU TIROIR DU COMPACTEUR8INSTALLATION DU POR
10Notes
Pub. No. 31-30256-1206C1559P19609-09 JRImprimé en ChineREMARQUE : en exécutant les installations décrites dans ce manuel, portez des lunettes de sécur
TOOLS REQUIRED•Level•Phillips screwdriver•Pliers•Gloves•Measuring tapeMODELS AVAILABLEGCG1580 SSGCG1500 BBGCG1500 WWGCG1700 II* ZCGS150 SSZCGP150 II**
4ADVANCE PLANNINGMODELS WITH A CUSTOM DRAWER PANELModels ZCGP150 II and GCG1700 IIThe custom drawer panel and custom handle ofyour choice should be se
Installation PreparationELECTRICAL REQUIREMENTSWARNING!FOR PERSONAL SAFETY: Remove housefuse or open circuit breaker beforebeginning installation. Do
Installation Preparation6UNPACKING THE COMPACTOR1• Move the compactor close to the installationlocation. • Use a section of the shipping carton to pro
7Installation PreparationLEVELING THE COMPACTOR3• The top of the compactor should be at least 1/8″ (3 mm) from the top of the cabinet opening. Youcan
• Use two #8 x 11/16″ (1.8 cm) long mountingscrews to fasten each retaining bracket at the topof the compactor to the underside of thecountertop.• If
9Installation• Grasp the sides of the drawer. Carefully slide thedrawer into the compactor.REINSTALL THE COMPACTORDRAWER8• Set the bag caddy into the
Commentaires sur ces manuels