GE GXSV65R Manuel d'utilisation et d'entretien télécharger pdf (Page 11)

Installation Instructions

MOUNTING SYSTEM INSTALLATION

Pick a location under the sink to mount the system. Location should be easily accessible, with clearance between

the bottom of the filter canisters and the floor or bottom of the cabinet; any less will result in difficulty of removing

filter canisters (see Fig. 5). Allow enough space on either side of the system for the tubing connections.

SCREW INSTALLATION

1. Remove this template from the manual for easier installation.

2. The top of the template openings should be placed a minimum of 17 inches above the bottom of the cabinet

or floor where the system is to be mounted (Fig. 4 and 5). NOTE: Any distance lower may result in filter canisters

interfering with the floor when removed.

3. Tape template to wall, then mark the wall where the screws are to be installed.

Install screws into the wall, leaving 3/16 inch clearance between the head of the screw and wall (drill pilot holes

if needed) (Fig. 6).

17 inches

5 inches

Bottom of Cabinet or Floor

Template for screw hole pattern on back of filtration system

Fig. 4

17 inches

5 inches

Screws

Screw

3/16 inch

Fig. 6

Fig. 5

Wall

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Pas de commentaire

GE GXSV65R Manuel d'utilisation et d'entretien Page 11