Ge DR-1200 Manuel d'utilisateur

DR-1200/1500/1800/2000EXRugged Dome Camera

Mounting the Unit Rugged Dome Installation Manual 10 1038346B / February 2003 5) If necessary, cut out the outlined back cable entry hole. To moun

Rugged Dome Installation Manual Mounting the Unit 1038346B / February 2003 11 2.2 FLUSH-MOUNTING THE HOUSING To flush-mount the housing, see Figu

Mounting the Unit Rugged Dome Installation Manual 12 1038346B / February 2003 Note: Ensure that you trace the back of the outer plate: this is the

Rugged Dome Installation Manual Mounting the Unit 1038346B / February 2003 13 2.3 USING PENDANT- AND WALL-MOUNT BRACKETS To install the housing o

Mounting the Unit Rugged Dome Installation Manual 14 1038346B / February 2003 1) Remove the three mounting screws from the pendant of the mounting

Rugged Dome Installation Manual Making Cable Connections 1038346B / February 2003 15 3 MAKING CABLE CONNECTIONS To make cable connections using t

Adjusting the Camera Rugged Dome Installation Manual 16 1038346B / February 2003 4 ADJUSTING THE CAMERA To adjust the camera focus see section 4.1.

Rugged Dome Installation Manual Adjusting the Camera 1038346B / February 2003 17 CAUTION: The phase adjustment must be made by a qualified ser

Adjusting the Camera Rugged Dome Installation Manual 18 1038346B / February 2003 4.3 AUTO IRIS LENSES For auto iris lenses, use an insulated adjust

Rugged Dome Installation Manual Adjusting the Camera 1038346B / February 2003 19 4.4 SETTING THE DAY/NIGHT CAMERA SWITCH LEVEL The Day/Night Rugg

© 2002 Kalatel, a GE Interlogix company All Rights Reserved. Any GE Interlogix, Kalatel division, software supplied with GE Interlogix, Kalatel divi

Closing the Housing Rugged Dome Installation Manual 20 1038346B / February 2003 5 CLOSING THE HOUSING Shut the housing cover and use the provided A

Rugged Dome Camera Installation Manual Table of Contents 1038346B / February 2003 3 TABLE OF CONTENTS BEFORE YOU BEGIN ...

Before You Begin Rugged Dome Camera Installation Manual 4 1038346B / February 2003 BEFORE YOU BEGIN Read these instructions before installing or op

Rugged Dome Installation Manual Preparing the Housing and Camera 1038346B / February 2003 5 1 PREPARING THE HOUSING AND CAMERA Using the provided

Preparing the Housing and Camera Rugged Dome Installation Manual 6 1038346B / February 2003 1.1 RETROFITTING WITH THE UTP MODULE To put the unit in

Rugged Dome Installation Manual Preparing the Housing and Camera 1038346B / February 2003 7 To install the UTP module see Figure 3 and Figure 4 a

Mounting the Unit Rugged Dome Installation Manual 8 1038346B / February 2003 2 MOUNTING THE UNIT Cables should be prepared and accessible at the mo

Rugged Dome Installation Manual Mounting the Unit 1038346B / February 2003 9 2.1 SURFACE-MOUNTING THE HOUSING To surface-mount the housing, see F