GE A1456W Manuel d'utilisateur télécharger pdf (Page 69)

66 67

Connecting to a PC

Use the USB cable and ArcSoft software (CD-ROM) supplied

with your camera to copy (transfer) pictures to a computer.

Setting the USB mode

Since the camera’s USB port can be set to connect with either

a PC or a Printer, the following steps will allow you to ensure

that the camera is correctly congured to connect with a PC.

1. Go to the camera setting menu, select USB connection

with the Up/Down button, and press the Right button.

2. Use the

Up/Down navigation buttons to select PC.

3. Press the

button to conrm the setting.

Transferring les to your PC

The computer will automatically detect the camera as a

removable drive. Double-click My Computer icon on the

desktop to locate the removable drive and to copy the folders

and les in the drive to a directory on your PC as you would

copy any typical folder or le.

By using the USB cable, you can transfer the captured photos

and videos to a PC. Follow the steps below to connect the

camera to a PC.

1. Start a computer to which ArcSoft software has been

installed.

2. Make sure both the camera and PC are turned on.

3. Connect one end of the supplied USB cable to the USB/AV

OUT port on your camera.

4. Connect the other end of the cable to an available USB

port on your PC.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 84 85

Pas de commentaire

GE A1456W Manuel d'utilisateur Page 69