Ge AEE08AR Manuel d'utilisateur télécharger pdf (Page 2)

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

AWARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric

shock or personal injury.

Miv

SAFETY PRECAUTIONS

Use this appliance only for its intended purpose

as described in this Owner's Manual.

This air conditioner must be properly installed

in accordance with the Installation Instructions

before it is used.

Never unplug your air conditioner by pulling on

the power cord. Always grip plug firmly and

pull straight out from the receptacle.

Replace immediately all electric service

cords that have become frayed or otherwise

damaged. A damaged power supply cord

must be replaced with a new power supply

cord obtained from the manufacturer and not

repaired. Do not use a cord that shows cracks

or abrasion damage along its length or at

either the plug or connector end.

If the receptacle does not match the plug, the

receptacle must be changed out by a qualified

electrician.

TurntheunitOFF^andunplugyourairconditioner

before making any repairs or cleaning.

NOTE: We strongly recommend that any

servicing be performed by a qualified

individual.

Foryoursofety^donotstore or use combustible

materials, gasoline or other flammable vapors

or liquids in the vicinity of this or any other

appliance.

All air conditioners contain refrigerants, which

under federal low must be removed prior to

product disposal. If you are getting rid of an

old product with refrigerants, check with the

company handling disposal about what to do.

These R410A air conditioning systems require

contractors and technicians to use tools,

equipment and safety standards approved for

use with this refrigerant. DO NOT use equipment

certified for R22 refrigerant only.

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove

the third (ground) prong from the power cord. For

personal safety, this appliance must be properly

grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped

with a 3-prong (grounding) plug which mates

with a standard 3-prong (grounding) wall outlet

to minimize the possibility of electric shock hazard

from this appliance.

Power cord includes a current interrupter device. A

test and reset button is provided on the plug case.

The device should be tested on a periodic basis by

first pressing the TEST button and then the RESET

button. If the TEST button does not trip or if the

RESET button will not stay engaged, discontinue

use of the air conditioner and contact a qualified

service technician.

Have the wall outlet and circuit checked by a

qualified electrician to make sure the outlet is

properly grounded.

Where a 2-prong wall outlet is encountered, it is

your personal responsibility and obligation to have

it replaced with a properly grounded 3-prong wall

outlet.

The air conditioner should always be plugged into

its own individual electrical outlet which has a

voltage rating that matches the rating plate.

This provides the best performance and also

prevents overloading house wiring circuits which

could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical

Requirements section for specific electrical

connection requirements.

1 2 3 4 5 6 7 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Ge AEE08AR Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Adoucisseurs Ge AEE08AR