GE JAS03M Manuel d'utilisateur télécharger pdf (Page 21)

Anti-Tip Device Installation Instructions

for Device Kit No. WBO6XO1O3

● ALL RANGES CAN TIP

●

IN~Ry

COULD

RESULT

[

● INSTALL ANTI-TIP

DEVICE PACKED WITH

RANGE

● SEE INSTRUCTIONS

Tools Needed

● Phillips head screwdriver

●

17(”

or adjustable wrench

● Flat blade screwdriver

Device attaches to floor or wall to

hold either right or left rear

leg

leveler. If

fas~ening

to floor,

sure

that screws do not penetrate

electrical wiring or plumbing. If

this cannot be determined, use

shorter screws that will not

penetrate through flooring.

Wall

behind

range

Attachment

to wall

Fig. 2

Device

Wall plate

IIB*

—

——

—

“

‘-

‘~

1. Decide whether the device will

3. Determine whether you will

be installed on the right or left side

anchor the device to the floor or

of range location.

to the wall as shown in figure 2.

—

If the device side of the range

is adjacent to a cabinet, place the

device against back wall and

cabinet as shown in figure 1.

If there is no adjacent cabinet,

determine where the location of the

For greater stability fasten the

device to both the wall and the

floor if possible. Fasten the device

securely with the screws provided.

Screws are self-drilling in wood,

plywood, particle and chip board,

and most metal framing. If attaching

range side (painted outside panel)

to masonry you can

b~y

suitable

will be. Place the device with its screws and anchors at hardware

outside edge at this location and

stores. Use a masonry drill to drill

against back wall. See figure 1. the required holes.

4. Using the wrench, back out the

four leg levelers at least two turns.

See your installation guide for

more leveling information before

positioning range.

5. Slide the range into place.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

GE JAS03M Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers GE JAS03M