4
Installation Instructions
PREPARING THE OPENING
1
MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE
DIMENSIONS
3 3/4 MIN.
4
RECOMMENDED GAS SUPPLY
LOCATION FROM BACKWALL
5
MAKE SURE WALL COVERINGS,
COUNTERTOP AND CABINETS
AROUND COOKTOP CAN
WITHSTAND HEAT (UP TO 200°F)
GENERATED BY COOKTOP
13″ MAX. Depth of unprotected
overhead cabinets
6″ MIN. clearance from
cutout to side wall on the
right of the unit
18″ MIN. height
from countertop to
nearest cabinet on
either side of unit
3-3/4″ MIN. clearance from
cutout to side wall on the
left of the unit
2
OVERALL COOKTOP DIMENSIONS
3
CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
Cooktop
28-1/4″
30″
21″ (21-1/2″ Max. for
Glass Top models)
3″
19-3/8″
19-5/8” width cut
14-1/4″
28-1/2”
length
of cut
2-1/4” Min. Between
cutout and the wall
behind the cooktop
2-1/2” Min. from
front edge of cutout
and front edge of
countertop
1” Min. From Backwall
13-1/4″
From Cutout
Center Line
Recommended
gas supply
location
NOTE: All gas cooktop models require 7/16″
free area below cooktop height to combustible
material.
30″ MIN. clearance from countertop
to unprotected overhead surface
Wall covering,
cabinets and
countertop must
withstand heat
up to 200°F
Commentaires sur ces manuels