GE GSD4210 Manuel d'utilisateur télécharger pdf (Page 10)

Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service

About the control panel lights.

Display What It Means What To Do

Electrical power to the

IF DISHWASHER WAS IN USE WHEN

dishwasher has been

THE POWER FAILURE OCCURRED:

interrupted but is now

back on.

Press the

RESET

pad and wait

approximately 30 seconds.

RESET

Unlatch and open the door.

LIGHT

If the detergent cup is open and

FLASHING

empty, close the door and rerun

the cycle with detergent in the

closed cup only.

If the detergent cup is closed reset

the dishwasher for the wash cycle

you want.

IF THE DISHWASHER WAS NOT IN USE

when power failure occurred, use

dishwasher as you normally would.

There is too much water The dishwasher is designed to

in the dishwasher. automatically pump out extra water

DRY

as long as the door is latched. When

LIGHT

you hear the motor stop running:

FLASHING

Unlatch the door and see if all the

water is gone. (It is normal for a

small amount of water to remain in

the bottom of tub to keep the water

seal lubricated.)

If you see water entering the

dishwasher, close and latch the door.

Shut off the water supply to the

dishwasher.

Press the

RESET

pad.

If water is gone and no water is

entering the dishwasher, restart

cycle.

If the

DRY

light starts to flash again,

shut off the water supply to the

dishwasher. Call for service.

DRY

RESET

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

GE GSD4210 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Lave-vaisselle GE GSD4210