GE GSD500 Manuel d'utilisateur Page 4

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 3
Howto operate your dishwasher
STEP 1. Load your dishwasher
with dishes, silverware, pots, pans,
bowls, etc. according to
instructions on pages 8 and 9.
STEP 2. Add detergent to the
detergent dispenser. Make sure the
Cycle Indicator Dial is at OFF
position before adding detergent.
(See pages 6 and 7.)
Use rinse aid agent to help prevent
spotting. (See page 6.) - -
STEP 3. Select
Option.
)
HEATED
DRYING
NO HEAT
DRYING
HEATED DRYING. Turns the
drying heater on for fast drying.
ENERGY SAVER (no heat
drying). Turns the drying heater off
to save energy. Dishes will dry
naturally over a longer period such
as overnight.
If you need your dishes sooner,
open the dishwasher door after the
cycle is complete to reduce the
natural drying time.
Use of this option reduces the
electrical energy used by this
model approximately
79?0for the
NORMAL WASH cycle.
STEP 4. Select the Cycle and start
dishwasher.
If your dishwasher drains into a ,
food waste disposer, operate the
disposer until it is empty before
starting the dishwasher. (See Cycle
selection hints on next page.)
To obtain the benefits of a
complete cycle, be careful that you
do not turn the dial any further
than necessary to start the
dishwasher.
c For NORMAL WASH cycle:
a. Latch the door.
s
RINSE & HOLO uJ=”$’op~loM~
b. Slowly turn Cycle Indicator Dial
to ON position to start the cycle.
You will hear the motor start. There
is a time delay between start-up
and water fill so you will not hear
any wash action right away.
For LIGHT WASH cycle:
a. Be sure door is unlatched.
0~.ON E.IGMT
WASH
@
0
ORVING
m
RINSE & HOW Iu$~ Wn$WTIJprlONI
b. Slowly turn Cycle Indicator Dial
to LIGHT WASH position.
c. Latch door to start the cycle. -
For RINSE & HOLD cycle:
a. Be sure door is unlatched.
b. Select ENERGY SAVER drying
option.
c. Slowly turn Cycle Indicator Dial
to RINSE & HOLD position.
d. Latch door to start the cycle.
4
Vue de la page 3
1 2 3 4 5 6 7 8 9 ... 15 16

Commentaires sur ces manuels

Pas de commentaire