GE GSD630 Manuel d'utilisateur Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
The Problem Solver
~continu.d,
PROBLEM
SPOTS AND
FILMINC
ON GLASSES AND
FLATWARE
CLOUDINESS ON
GLASSWARE
CHIPPING OF CHINA
POSSIBLE CAUSE
Spotting can be caused by all these things:
Extremely hard water. (See How To Choose and Use Detergent section. )
Low inlet water temperature. (See How To Test Water Temperature section. )
Overloading the dishwasher.
Improper loading. (See Loading section. )
Old or damp powder detergent.
Phosphate level in detergent too low. (See How to Choose and Use Detergent section. )
Rinse agent dispenser empty. (See How To Use Rinse Agent section. )
Too little detergent. (See How to Choose and Use Detergent section. )
Local water conditions and personal preferences vary. Try several brands of detergents
to find one that gives the best results for you. A liquid dishwasher detergent may help
reduce filming.
To remove stubborn spots and film from glassware:
1. Remove
all
metal utensils from the dishwasher.
2. Do not
add
detergent.
3.
Select NORMAL WASH cycle.
4. Start the dishwasher and allow to run for
18
to 22 minutes. The dishwasher will now
be in the main wash.
5.
Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of the
dishwasher.
6.
Close the door and allow to complete the cycle.
If vinegar rinse doesn’t work: Repeat as above, except use
1/4
cup (60 ml) of citric
acid
crystals instead of vinegar. (Most drugstores carry citric acid crystals. If yours
doesn’t, call GE Factory Service.)
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.
If vinegar or citric acid crystal rinse doesn’t work, the cloudiness is “etching.” The film
cannot be removed.
It
can be prevented: Use less detergent if you have soft water. Wash glassware in the
shortest cycle that
will
get
them clean.
Water temperature entering dishwasher exceeds
150°F.
Rough handling can cause chipping. Load with care. Make sure glassware and china
are secure and can’t jar loose. (See Loading section. ) Make sure tall glasses and
stemware will clear the top of the tub when you push the rack into the dishwasher.
Always use the top rack for delicate items.
12
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire