GE GFD48ESPKDG Manuel d'installation télécharger pdf (Page 36)

Installation Instructions

REVERSING THE DOOR SWING (if desired)

RE-LOCATE HINGE ASSEMBLY AND

HANDLE SPACER

A. Place the inner door frame on a soft and flat

surface so that the inner door gasket is facing

updwards.

B. Remove 6 screws (#8 x 1/2”) that secure the

hinge assembly and handle spacer.

D. Rotate hinge assembly 180 degrees and

re-locate it and the door plug (on some models)

on the opposite side of the inner door frame.

E. Rotate the handle spacer or handle spacer/latch

assembly (depending on model) 180 degrees and

re-locate on the opposite side of the inner door

frame.

RE-LOCATE HINGE ASSEMBLY AND

HANDLE SPACER (cont.)

F. Re-install screws securing hinge assembly and

handle spacer.

C. Separate the hinge assembly, door plug (on

some models), handle spacer or handle spacer/

latch assembly (depending on model) from the

inner door frame.

Hinge

assembly

Handle spacer

(on some models)

Door plug

(on some models)

Handle spacer/

Latch assembly

(on some models)

Hinge

assembly

Handle spacer

(on some models)

Door plug

(on some models)

Handle spacer/

Latch assembly

(on some models)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 143 144

Pas de commentaire

GE GFD48ESPKDG Manuel d'installation Page 36