GE GUD24ESSJWW Manuel d'instructions télécharger pdf (Page 9)

Installation Instructions

24” MODELS ONLY:

DRYER EXHAUST TO RIGHT, LEFT OR

BOTTOM CABINET

WARNING -

BEFORE PERFORMING

THIS EXHAUST INSTALLATION, BE SURE

TO DISCONNECT THE APPLIANCE FROM

ITS ELECTRICAL SUPPLY. PROTECT YOUR

HANDS AND ARMS FROM SHARP EDGES

WHEN WORKING INSIDE THE CABINET. BE

SURE TO WEAR GLOVES.

• Apply duct tape as shown on the joint between the dryer

internal duct and the straight duct pipe.

WARNING-

Internal duct joints must be

secured with tape, otherwise

they may separate and cause

a safety hazard.

FLOOR

For downward venting, rotate elbow

sections so that elbow points downward

ADDING ELBOW AND DUCT FOR

EXHAUST TO LEFT OR RIGHT SIDE OF

CABINET

• Rotate elbow sections so that the opening points to the

side to which you want to vent. Preassemble 4” elbow with

4” duct. Use only 4” UL approved rigid metal for ducting

inside the dryer.

• Connect duct assembly to the internal elbow.

WARNING

- Be sure not to pull or damage the

electrical wires inside the dryer when inserting the duct.

4” UL approved rigid metal

DUCT

TAPE

27” MODELS ONLY: