Ge ZDP364NDPSS Manuel d'utilisateur télécharger pdf (Page 11)

REMOVE PACKAGING

• Cut the metal banding. Lift the carton straight up.

• Locate the two runner strips from the top

of the packaging. These strips will be used to

protect the kitchen floor during installation.

• Remove corner posts. Dispose of packaging

materials.

• Remove grill/griddle covers, grill grate and burner

grates.

• Lift out cast-iron griddle flue cover, grease troughs

and pads.

STEP 1

Hinge

Lock

Slot

Installation

• Cut the ties holding the grill grate to the grill frame.

• Lift off burner caps and remove foam pad,

then lift off burner heads and remove foam pad.

CAUTION

Doors and passageways leading to the installation

location require at least 32” opening. If the opening

is less than 32”, the oven door(s) and control knobs

must be removed.

REMOVE THE OVEN DOOR(S) ONLY IF NECESSARY

to move the range through the doorways. To

prevent damage to the sides of the range, it will be

necessary to pad the corners beneath the straps

on the hand-truck.

To remove the oven door(s):

• Fully open the door.

• Each hinge has a hinge latch. Close the hinge

latch down against the door frame.

• Firmly grasp the door at the top sides.

• Close the door to the near-vertical position.

• Lift the door up and pull straight out.

• Remove the control knobs by pulling them

straight out.

Griddle Flue Cover

Grease Troughs

Ties

Remove Foam Pads

CAUTION

Stand clear. The ends of the cut metal banding may

snap toward you.

• Open oven door(s) and remove packaging.

Remove shelf holding broiler pan, tape, literature

package, shelf lubricant and probe.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Ge ZDP364NDPSS Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la maison Ge ZDP364NDPSS