GE GIE21GTHBB Manuel du propriétaire télécharger pdf (Page 21)

REHANG THE REFRIGERATOR DOOR

1. Lower the refrigerator door onto the bottom

hinge pin.

Installation Instructions

2. While holding the door securely, align the socket

in the door with the hole in the center hinge.

Attach the center hinge and gasket with two

screws with a 5/16s socket and ratchet.

3. Check to ensure the alignment between the socket

in the door and the hole in the center hinge. Insert

the hinge pin into the center hinge and tighten with

a Phillips screwdriver until the shoulder of the hinge

pin is touching the center hinge.

REHANG THE FREEZER DOOR

1. Lower the freezer door onto the center hinge pin.

2. Place the left top hinge so the pin fits into the door

socket. (Left top hinge and cover can be found inside

of the product. Call GE Service at 800.GE.CARES

(800.432.2737 or in Canada call 800.561.3344 if

parts are missing.) Support the door on the handle

side and make sure the door is straight and the gap

between the doors is even across the front. While

holding the door in place, tighten the top hinge

screws. Do not overtighten these screws. Tighten

them until they are just snug, and then turn them

another one-half turn.

3. Snap the left top hinge cover over the hinge.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Pas de commentaire

GE GIE21GTHBB Manuel du propriétaire Page 21