Ge 26998 Manuel d'utilisateur télécharger pdf (Page 25)

CHANGING THE BATTERY

Make sure the telephone is OFF before you replace battery.

1. Remove the battery compartment door.

2. Disconnect the battery plug from the jack in the handset

battery compartment and remove the battery pack.

3. Insert the new battery pack and connect the battery plug.

4. Put the battery compartment door back on.

5. Place handset in the base to charge. If you don’t

charge the handset battery properly (for 12 hours)

when you first set up the phone and/or when you

install a new battery pack, the battery’s long-term

performance will be compromised.

BATTERY SAFETY PRECAUTIONS

• Do not burn, disassemble, mutilate, or puncture. Like

other batteries of this type, toxic materials could be

released which can cause injury.

• To reduce the risk of fire or personal injury, use only the battery listed in

the User’s Guide.

• Keep batteries out of the reach of children.

• Remove batteries if storing over 30 days.

NOTE: The RBRC seal on the battery used in your ATLINKS

USA, Inc.

product indicates that we are participating in a

program to collect and recycle Nickel Cadmium batteries

throughout the United States. Please call 1-800-8-BATTERY for

information or contact your local recycling center.

Ni-Cd

RBRC

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 67 68

Pas de commentaire

Ge 26998 Manuel d'utilisateur Page 25