Ge DECT6.0 28128 Manuel d'utilisateur télécharger pdf (Page 16)

Language

1. Make sure your base is OFF (not in talk mode).

2. Press the Menu (SKL) button to enter the main menu.

3. Use the or button to scroll to Phone Settings.

4. Press the Select (SKL) button to enter the submenu.

5. Use the or button to scroll to Language.

6. Press the Select (SKL) button to enter the menu.

7. Use the or button to scroll to the desired language. The default is ENGLISH.

8. Press the Select (SKL) button to save your selection. You will hear a conﬁrmation

tone.

recordIng the outgoIng announcement

For best results when recording, you should be about nine inches from the

microphone, and eliminate as much background noise as possible.

1. Make sure your base is OFF (not in talk mode).

2. Press and hold the ANNOUNCE button until screen displays ANNOUNCEMENT

RECORDING.

3. Begin speaking after you hear the beep.

4. Release the button when you ﬁnish your announcement.

NOTE: To return to the default announcement after you

have recorded your own outgoing announcement, press the

ANNOUNCE button and release it when you hear the beep or while

announcement is playing, press the DELETE button.

Sample Outgoing Announcement

Hi, this is (use your name here), We can’t answer the phone right now, so please

leave your name, number and a brief message after the tone, and we’ll get back to

you soon. Thanks.

NOTE: The maximum recording time for the outgoing

announcement is 2 minutes.

revIewIng the announcement

Press and release the ANNOUNCE button to review your outgoing announcement.

audIble quIck setup guIde

If you need additional assistance; while in standby mode, press the REPEAT button on

the base and follow the voice instructions.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 65 66

Pas de commentaire

Ge DECT6.0 28128 Manuel d'utilisateur Page 16