Ge ZGU48N4G Manuel d'utilisateur télécharger pdf (Page 24)

Questions?

Before you

call for

service…

PROBLEM POSSIBLE CAUSE

BURNERS DO NOT • Electrical plug is not plugged into a live power outlet.

LIGHT OR SPARK

• Gas not turned on.

RANDOMLY

• Burner parts not replaced correctly.

• Holes in the simmer rings or slits in the burner rings are clogged.

• Clogged orifice, or wet burners or electrodes.

BURNERS HAVE • Burner parts not replaced correctly.

YELLOW OR

YELLOW-TIPPED

FLAMES

• If burner flames look like (A), call for service. Normal burner flames

should look like (B) or (C), depending on the type of gas.

BURNER FLAMES • If cooktop is connected to LP gas, contact the person who installed

VERY LARGE your cooktop or made the conversion.

OR YELLOW

BURNER CONTROL • When the knob is at the OFF position, it must be pushed in before

KNOB WILL NOT it can be turned, and it can only be turned in a counterclockwise

TURN direction. Similarly, when the knob is in the LOW or X-HI

positions, it must also be pushed in to change flame settings.

A. Yellow flames: Call for

service.

B. Yellow tips on outer cones:

Normal for LP gas.

C. Soft blue flames: Normal

for natural gas.

The Problem Solver

Stainless Steel Cooktop

1 2 ... 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Ge ZGU48N4G Manuel d'utilisateur Page 24