Ge JCB968 Manuel d'utilisateur télécharger pdf (Page 36)

36

Installation Free-Standing

Instructions Electric Ranges

BEFORE YOU BEGIN

Read these instructions completely and

carefully.

•

IMPORTANT

— Observe all

governing codes and ordinances.

• Note to Installer – Be sure to leave these

instructions with the Consumer.

• Note to Consumer – Keep these instructions

for future reference.

• Skill level – Installation of this appliance

requires basic mechanical skills.

• Product failure due to improper installation

is not covered under the Warranty.

WARNING — This appliance must

be properly connected by means of the

supplied cord and plug. If your kitchen does

not have a receptacle, you must have one

installed by a licensed electrician.

FOR YOUR SAFETY:

WARNING — Before beginning the

installation, switch power off at service panel

and lock the service disconnecting means

to prevent power from being switched on

accidentally. When the service disconnecting

means cannot be locked, securely fasten a

prominent warning device, such as a tag,

to the service panel.

All rough-in and spacing dimensions must be

met for safe use of your range. Electricity to

the range can be disconnected at the outlet

without moving the range if the outlet is in

the preferred location (remove lower drawer).

ANTI-TIP DEVICE

WARNING — To reduce the risk

of tipping, the appliance must be secured by

properly installed Anti-Tip bracket packed

with this appliance.

If the Anti-Tip device supplied with the range

does not fit this application, use the universal

Anti-Tip device WB2X7909.

WARNING —

• All ranges can tip

• Injury to persons could result

• Install Anti-Tip bracket packed

with range

• See Installation Instructions

If you pull the range out and away from the

wall for any reason, make sure the Anti-Tip

bracket is engaged when the range is pushed

back against the wall.

Questions? Call 1-800-361-3400 or Visit our Website at: www.GEAppliances.ca

FOR YOUR SAFETY:

To reduce the risk of burns or fire when

reaching over hot surface elements, cabinet

storage space above the cooktop should be

avoided. If cabinet storage space is to be

provided above the cooktop, the risk can

be reduced by installing a range hood that

sticks out at least 5” beyond the front of the

cabinets. Cabinets installed above a cooktop

must be no deeper than 13”.

Make sure the cabinets and wall coverings

around the range can withstand the temperatures

(up to 200°F.) generated by the range.

REMOVE SHIPPING MATERIALS

Remove packaging materials. Failure to

remove packaging materials could result in

damage to the appliance.

NOTE: Cut the orange shipping ties from the

power cord, being careful not to damage the

cord.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Commentaires sur ces manuels

Pas de commentaire