GE JT96530 Manuel d'utilisateur télécharger pdf (Page 45)

ge.com

Lower Oven Light Bulb

NOTE: The glass cover (on some

models) should be removed only when

cold. Wearing latex gloves may offer

a better grip.

CAUTION: Before replacing your

oven light bulb, disconnect the electrical

power to the oven at the main fuse or

circuit breaker panel.

Be sure to let the light cover and bulb

cool completely.

For your safety, do not touch a hot bulb

with bare hands or a damp cloth.

To remove:

Turn the glass cover

counterclockwise 1/4 turn until the

tabs of the glass cover clear the

grooves of the socket.

Using gloves or a dry cloth, remove

the bulb by pulling it straight out.

To replace:

Use a new 130-volt halogen bulb,

not to exceed 50 watts.

Using gloves or a dry cloth, remove

the bulb from its packaging. Do not

touch the bulb with bare fingers.

Push the bulb straight into the

receptacle all the way.

Place the tabs of the glass cover into

the grooves of the socket. Turn the

glass cover clockwise 1/4 turn.

For improved lighting inside

the oven, clean the glass cover

frequently using a wet cloth. This

should be done when the oven is

completely cool.

Reconnect electrical power to

the oven.

Bulb

Socket

Tab

Glass cover

Receptacle

Use gloves

or cloth

Receptacle

Oven Shelves and Convection Roasting Rack (lower oven)

Clean the oven shelves and the

convection roasting rack with an abrasive

cleanser or steel wool. After cleaning,

rinse the shelves and rack with clean

water and dry with a clean cloth.

NOTE: The oven shelves and convection roasting

rack may be cleaned in the self-cleaning oven.

However, the shelves will darken in color, lose

their luster and become hard to slide if cleaned

during the self-cleaning cycle.

To make the shelves slide more easily,

apply a small amount of vegetable oil

or cooking oil to a paper towel and wipe

the edges of the oven shelves with the

paper towel.

Roasting rack

Oven shelf

Safety Instructions

Operating Instructions Care and Cleaning

Troubleshooting Tips Consumer Support

Do not use a steel wool pad; it will scratch

the surface.

To clean the stainless steel surface,

use warm sudsy water or a stainless steel

cleaner or polish. Always wipe the surface

in the direction of the grain. Follow the

cleaner instructions for cleaning the

stainless steel surface.

To inquire about purchasing stainless

steel appliance cleaner or polish, or to

find the location of a dealer nearest you,

please call our toll-free number:

National Parts Center

1.800.626.2002

ge.com

Stainless Steel Surfaces (on some models)

45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

Commentaires sur ces manuels

Pas de commentaire