GE PNM9196SFSS Manuel d'instructions télécharger pdf (Page 9)

DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

Your cabinets may have decorative trim that interferes

with the oven installation. Remove the decorative trim

to install the oven properly and to make it level.

7+(29(10867%(/(9(/

Use a level to make sure the cabinet bottom is level.

If the cabinets have a front overhang only, with no back

or side frame, install the mounting plate down the same

distance as the front overhang depth. This will keep

the oven level.

Measure the inside depth of the front overhang.

Draw a horizontal line on the back wall an equal

distance below the cabinet bottom as the inside depth

of the front overhang.

For this type of installation with front overhang only,

align the mounting tabs with this horizontal line, not

touching the cabinet bottom as described in Step D.

3ODWHSRVLWLRQ²EHQHDWKIODWERWWRP

FDELQHW

3ODWHSRVLWLRQ²EHQHDWKUHFHVVHGERWWRP

FDELQHWZLWKIURQWRYHUKDQJ

Mounting Plate Tabs

Touching the Cabinet

Bottom

Mounting Plate

with Tabs Below

Cabinet Bottom

the Same Distance

as the Front

Overhang Depth

At least 30s, up to 36s

3ODWHSRVLWLRQ²EHQHDWKIUDPHGUHFHVVHG

FDELQHWERWWRP

Mounting Plate Tabs

Touching the Back

Frame

Installation Instructions

30s to Cooktop

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Pas de commentaire

GE PNM9196SFSS Manuel d'instructions Page 9