Ge 15339430 Manuel d'utilisateur télécharger pdf (Page 18)

SYSTEM VERIFICATION

The following procedures should be used to test the system’s

configuration and identify possible line connection errors. The phone must

be connected to the AC power outlet, lines 1 and 2 must be connected to

the LINE 1,2 jack, and the phone must be programmed with a station

address number.

OTHER STATIONS

1. Press LINE 1.

2. Look at all the other stations. If they all indicate line 1 is being used, the

connection is correct.

1. Press the INTERCOM button. The display reads

INT-

and the INTERCOM

indicator comes on.

2. Enter a station address to check by using the keypad. The display

indicates what station you have entered. If the station you entered is

connected to the system, a paging sound will be heard at the station

you are calling and the INTERCOM indicator will flash red. If the station

is not connected to the system, you will hear an error tone, and inter-

com will be cancelled.

YOUR STATION

1. Press REVIEW.

2. Press INTERCOM. The display will read

Addr-

with the two-digit station

address (01-16).

NOTE: To change the station address, see “Changing a Station Address”.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

Ge 15339430 Manuel d'utilisateur Page 18