Ge 29893 Manuel d'utilisateur télécharger pdf (Page 7)

FLASH

REDIAL/PAUSE

HOLD

mic

ON/OFF

VOL -

VOL +

ERASE

MEM DIAL STORE

QUICK DIAL

MEM DIAL

SPEAKER

ABC

DEF

GHI

JKL

MNO

TUV

OPER

TONE

WALL MOUNT INSTALLATION

1. Carefully turn the phone over. Detach the mounting

bracket by pressing the tabs in. Turn the bracket

around so that it looks like the diagram. Align the

tabs on the bracket with the slots on the base and

gently press the bracket down until it snaps into

place. Turn the phone back over.

2. Plug one end of the short telephone line cord into the

LINE jack on the back of the base, and feed the cord

through the grooves on the bottom of the base so

that the phone rests flat against the wall. Plug the

other end into a modular telephone (wall) jack.

3. Connect one end of the power supply to the POWER

9V AC jack on the back of the base. Plug the other end

into an electrical (AC) outlet. The unit beeps once and

is ready for setup or to answer calls with the default

greeting and settings.

4. Remove the handset hook, turn it upside down, and

press it back into the slot until it clicks into place. This

prevents the handset from falling out of the cradle

while hanging on the wall.

5. Plug the coiled cord into the jack on the handset and

the jack on the side of the base.

6. Slip the mounting holes (on bottom of unit) over the

wall plate posts and slide the base down into place.

7. Place the handset in the cradle.

NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse

(rotary) dialing, see “Setting the Dialing Mode.” If you don’t know which type of service

you have, check with the phone company.

CAUTION: Only use the ATLINKS USA 5-2434 power supply that came with this

unit. Using other power supplies may damage the unit.

Handset hook

1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Commentaires sur ces manuels

Pas de commentaire

Ge 29893 Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Téléphones Ge 29893