GE K-45404F Manuel d'utilisateur télécharger pdf (Page 10)

GEK-45404

RECEIVING, HANDLING, AND STORAGE

RECEIVING

These relays, when not shipped as a part of a control panel, will be shipped in cartons designed to

protect them against damage. Immediately upon receipt of the relay, an examination should be made

for any damage sustained during shipment. If injury or damage resulting from rough handling is

evident, a damage claim should be filed at once with the transportation company and the nearest

General Electric Sales Office should be notified promptly.

HANDLING

Reasonable care should be exercised in unpacking the relay in order that none of the parts are injured

nor the adjustments disturbed.

STORAGE

If the relays are not to be installed immediately, they should be stored in their original cartons in a

place that is free from moisture, dust, and metallic chips. Foreign matter collected on the outside of

the case may find its way inside when the cover is removed and cause trouble in the operation of the

relay.

ACCEPTANCE TESTS

Immediately upon receipt of the relay an inspection and acceptance test should be made to make sure

that no damage has been sustained in shipment and that the relay calibrations have not been

disturbed.

VISUAL INSPECTION

Check the nameplate stamping to make sure that the model number and rating of the relay agree with

the requisition.

Remove the relay from its case and check that there are no broken or cracked molded parts or other

signs of physical damage, and that all screws are tight.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

GE K-45404F Manuel d'utilisateur Page 10