Ge Cubic Foot Manuel d'utilisateur télécharger pdf (Page 11)

11

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer SupportInstallation Instructions

Leveling legs

Bottom

hinge

Plug button

Spacer

Hinge cover

Plug buttons

or screws

Hinge

Door Reversal

(on some models)

1. Remove the small plug button on the

left side of the door top cap.

2. Remove the three plug buttons or

screws on the left side on top of the

cabinet.

3. Remove the plastic hinge cover by

lifting it up by the front edge.

4. Remove the three screws from the

top hinge.

5. Lift the door up and off the bottom

hinge (right side).

6. Tilt the refrigerator cabinet back to

remove the right leveling leg.

7. Remove the screws on the bottom

hinge (right side) and the left leveling

leg. Move the bottom hinge to the left

side and secure it with the screws and

leveling leg.

IMPORTANT: The left leg has a spacer that

must be moved to the right side leveling leg

when the door swing is reversed.

8. Screw the right leveling leg, with the

spacer in place, back in place on the

right side.

9. Position the door on the left bottom

hinge. With the magnetic gasket

holding the door in place, secure the

top hinge with screws.

10. Make sure the door is aligned with the

refrigerator cabinet before continuing.

11. Replace the hinge cover on top of

the hinge.

12. Put the plug button in the hole on the

right side of the door cap.

13. Put the three plug buttons or screws on

the right side on top of the cabinet.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire