Ge ZFGP21HZSS Manuel d'utilisateur télécharger pdf (Page 4)

Installation Instructions

TOOLS REQUIRED

• Adjustable wrench

• 3/8" and 5/15" socket ratchet/driver

• Phillips head screwdriver

• 3/32", 1/8", 1/4" Allen wrenches

• 1/8" Drill bit and electric or hand drill

• Tape measure

• Pencil

• Wire cutters

• 1/4" Nut driver

• Level

MATERIALS REQUIRED

• 1/4" O.D. compression nut and 2 ferrules (sleeves)

OR GE SmartConnect

™

Refrigerator Tubing Kits

FLOORING

For proper installation, this refrigerator must be placed on

a level surface of hard material that is at the same height

as the rest of the flooring. This surface should be strong

enough to support a fully loaded refrigerator.

IMPORTANT NOTE: Protect the finish of the flooring.

Cut a large section of the cardboard carton and place

under the refrigerator where you are working.

GROUNDING THE REFRIGERATOR

IMPORTANT – (Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE

PROPERLY GROUNDED.

The power cord of this appliance is equipped with

a 3-prong (grounding) plug which mates with a

standard 3-prong (grounding) wall receptacle to

minimize the possibility of electric shock hazard

from this appliance.

Have the wall outlet and circuit checked by a

qualified elec tri cian to make sure the outlet is

properly grounded.

Where a standard 2-prong wall outlet is en coun tered,

it is your personal responsibility and obligation to

have it replaced with a properly grounded 3-prong

wall outlet.

DO NOT, UNDER ANY

CIRCUMSTANCES, CUT

OR REMOVE THE THIRD

(GROUND) PRONG

FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT

THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH

THIS APPLIANCE.

1 2 3 4 5 6 7 8 9 ... 15 16

Commentaires sur ces manuels

Pas de commentaire

Ge ZFGP21HZSS Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Ge ZFGP21HZSS