Ge ZFGP21HZSS Manuel d'utilisateur télécharger pdf (Page 13)

To Remove the Full-Width Basket on

Top Freezer Drawer Models:

1 2SHQWKHWRSIUHH]HUGUDZHUXQWLOLWVWRSV

2 The freezer basket rests on the inside tabs

on the drawer slides.

3 Lift the front end of the basket so that the front

two alignment tabs come out of the metal slide

bracket first. Then rotate the front edge of the

basket up while lifting the remaining two rear

alignment tabs out of the metal slide bracket.

4 Make sure the plastic sleeves remain attached

to the 4 slots on the metal slide brackets.

When Replacing the Full-Width Basket:

Tilt the basket back and lower it down into

the drawer. Rotate the basket to a horizontal position

and press it down into the 4 alignment tabs.

NOTE: Always be sure that all 4 basket slots

are engaged in the metal slide brackets before sliding

back into the freezer.

Basket

removal (top

drawer)

Shelves and Bins

Stainless Steel Refrigerator

Appearance may vary

Tab

The freezer basket has a divider that can be both

repositioned or removed.

To Remove the Divider in the Bottom

Freezer Basket:

Pull the divider forward until the rear locating tabs

are out of the slots. Turn the divider slightly to the

side to release the front locating tabs and lift out.

To Replace the Divider in the Bottom

Freezer Basket:

Turn the divider slightly to one side so the tabs on

the front fit into the vent slots on the basket. Position

the divider so the back locating tabs snap into place

in the back vent slots.

To Reposition the Divider

in the Bottom Freezer Basket:

1 Remove the divider as instructed above.

2 Slide the divider left or right to the desired

location and replace as instructed above.

Adjustable

divider in

bottom

freezer

basket

Tabs

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Ge ZFGP21HZSS Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Réfrigérateurs Ge ZFGP21HZSS