Ge ZIK30GNDII Manuel d'utilisateur télécharger pdf (Page 8)

8

Automatic Icemaker (freezer models)

30" Bottom-Freezer

Automatic

icemaker

A newly installed refrigerator may take 12–24

hours to begin making ice. The refrigerator

is shipped with the icemaker set to ON.

The icemaker will produce seven cubes per

cycle—approximately 15 cycles in a 24-hour

period, depending on freezer compartment

temperature, room temperature, number of

door openings and other use conditions.

If the refrigerator is operated before the water

connection is made to the icemaker, set the

icemaker to OFF. To set the icemaker to OFF,

press the ZONE indicator on the control pad

twice to select the freezer drawer. Press the ICE

icon to the right. The line under ICE will

disappear and the word OFF will show under ICE.

Throw away the first full bucket of ice.

Be sure nothing interferes with the sweep

of the feeler arm.

When the bin fills to the level of the feeler arm,

the icemaker will stop producing ice.

It is normal for several cubes to be joined

together.

If ice is not used frequently, old ice cubes

will become cloudy, taste stale and shrink.

After the icemaker has been turned on again,

there will be a delay of about 45 minutes before

the icemaker resumes operations.

NOTE: In homes with lower-than-average

water pressure, you may hear the icemaker

water valve cycle on several times when

making one batch of ice.

NOTE: Icemaker works best between

40 and 120 PSI home water pressure.

Icemaker

Feeler Arm

Accessing

the icemaker

and freezer

drawer

The icemaker is located on the ceiling of the

freezer drawer and to the left rear. There is

an LED strip in the freezer drawer ceiling. The

freezer drawer contains 1 ice bin.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 67 68

Commentaires sur ces manuels

Pas de commentaire