Ge ZIP360NZ Manuel d'utilisateur télécharger pdf (Page 14)

STEP 10 INSTALL 1/4” FRAMED PANELS

• There are two sets of holes in the handle side trim.

Replace handle side trim by installing the original screws

in the FRONT screw holes.

• Secure the handle to the door using the REAR

screw holes.

• Follow the same procedures to install the second door

panel and the drawer panel.

IF YOU ARE INSTALLING OVERLAY PANELS,

GO TO STEP 10A.

Install door and drawer panels:

• Open door to 90°. Remove the 4 Phillips head screws

from the door handle.

• Remove handle. Retain all screws.

• Remove 4 screws holding trim, lift off trim.

Retain screws.

• Slide framed panel into the door trim.

Standard supplied handle shown

in 1/4” panel position.

194Dia12

Installation Instructions

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Ge ZIP360NZ Manuel d'utilisateur Page 14