Ge 20309 Manuel d'utilisateur télécharger pdf (Page 12)

Volume/Mute Control and Punch-Through

This remote lets you select which device Mode controls your

Volume/Mute buttons. The remote is initially set for all device

Modes to use their own Volume/Mute control if present. If the

programmed code has no Volume/Mute operation of its own then

those buttons will punch-through control to the TV Mode device

without needing to change to TV Mode.

Any Mode chosen for Volume/Mute control MUST have its own

Volume/Mute function or the Volume/Mute buttons will do

nothing.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one

chosen Mode for Volume/Mute button control without the needing

to change to that Mode.

1. Press and hold the SETUP button until the red indicator

turns on, then release the button.

2. Press and hold the MUTE button until the red indicator

blinks off, then release the button.

3. Press and release the desired Mode button (TV, VCR,

etc.) for Volume/Mute control, the red indicator blinks

then stays on.

4. Press and release the MUTE button and the red

indicator turns off. The red indicator will blink rapidly

for three seconds if the Mode you have selected has no

Volume/Mute control.

All other Modes will now punch-through to your chosen Mode for

Volume/Mute control.

Using Your Remote, cont.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Ge 20309 Manuel d'utilisateur Page 12