Ge 20620 GE Universal Remote Manuel d'utilisateur télécharger pdf (Page 10)

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will

require you to set up two different Mode buttons to control both

parts of the Combo device. For example, if you have a TV/DVD

Combo, you might need to set up one code under the TV button to

control the TV part AND a separate code (under any other Mode

button) to control the DVD part.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) have

separate buttons on the original remote to select the part of the

Combo device to be controlled. For example, if your Combo device

is a DVD/VCR then its original remote might have separate DVD

and VCR buttons for selection of the Combo part you would control.

The equivalent button functions can be found on your new remote

by using the device Mode and SETUP buttons.

Referring to “Programming with Code Search” on page 8, setup

a device Mode (e.g. DVD) with the correct code for your Combo

device. Assuming the DVD/VCR Combo device is the example and

its code is programmed under DVD Mode, press and hold the DVD

Mode button for more than one second to send the DVD button

command. To send the VCR button command, quickly press and

release the SETUP button followed by pressing and releasing

the DVD Mode button. This method can be applied similarly to

all Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) and is

available for all Modes. Note this feature is not supported by all

codes.

Controlling Devices Requiring Separate Power On and Off

Buttons

Some devices (e.g. certain RCA TVs) require separate Power On and

Power Off buttons to turn the device on and off. The equivalent

button functions can be found on your new remote by using the

device Mode and ON-OFF buttons. Referring to “Programming with

Code Search” on page 8, setup a device Mode (e.g. TV) with the

correct code for your device.

Assuming a TV device is the example and its code is programmed

under TV Mode, to turn your TV on, press and hold the TV Mode

button for more than one second to transmit the Power On button

command.

Controlling Devices Requiring Separate Power On and Off

Buttons, cont.

To turn the TV off, press and release the ON-OFF button to transmit

the Power Off button command. This method can be applied

similarly to any device and is available for all Modes. Note this

feature is not supported by all codes.

Setup, cont.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Ge 20620 GE Universal Remote Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôle à distance Ge 20620 GE Universal Remote