Ge 20621 Manuel d'utilisateur télécharger pdf (Page 11)

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one

chosen Mode for Volume/Mute button control without the needing

to change to that Mode.

1. Press and hold the SETUP button until the red

indicator turns on, then release the button.

2. Press and hold the MUTE button until the red

indicator blinks off, then release the button.

3. Press and release the desired Mode button (TV, DVR,

etc.) for Volume/Mute control, the red indicator blinks

then stays on.

4. Press and release the MUTE button and the red

indicator turns off. The red indicator will blink rapidly

for three seconds if the Mode you have selected has

no Volume/Mute control.

All other Modes will now punch-through to your chosen

Mode for Volume/Mute control.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own Volume/Mute

control. Note - If your chosen Mode has no Volume/Mute functions

of its own then the Volume/Mute buttons will do nothing.

1. Press and hold the SETUP button until the red

indicator turns on, then release the button.

2. Press and hold the MUTE button until the red

indicator blinks off, then release the button.

3. Press and release the desired Mode button (TV, DVR,

etc.), the red indicator blinks then stays on.

4. Press and release the VOLUME- (Down) button, the

red indicator blinks then stays on.

5. Press and release the MUTE button and the red

indicator turns off.

Your chosen Mode will now use its own Volume/Mute

control.

Using Your Remote, cont.

1 2 ... 6 7 8 9 10 11 12 13 14

Pas de commentaire

Ge 20621 Manuel d'utilisateur Page 11