Ge 24930 GE Universal Remote Manuel d'utilisateur télécharger pdf (Page 5)

Using Your Remote

Code Identification

The Code Identification Feature allows you to

identify the four digit library code stored under your

device button. For example, if you want to find out

what four digit code is stored under your TV device

button, follow the six steps below:

1. Press and hold the SETUP button until

the red indicator stays on. Release the

SETUP button.

2. Press and release the desired device

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Press and release the SETUP button.

The red indicator blinks once and

remains lit.

4. To find the first digit for

the code stored under

the device button

pressed in step 2,

press each numeric

button from 0-9 in

turn. The number that

causes the indicator

light to blink is the

first digit in your code.

5. To find the second digit, repeat step 4.

6. Repeat step 4 to find the third and fourth digit.

This time the red indicator turns off and stays off.

Code Search

If your device does not respond after you have tried

all the codes for your brand, or if your brand is not

listed, try searching for your code by following these

steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the SETUP button until

the red indicator stays on, then

release the SETUP button.

3. Press and quickly release the desired

device button (TV, VCR, etc.). The red

indicator blinks off once.

4. Press the ON-OFF button repeatedly

(up to 300 times) until the device to

be controlled turns off. The red

indicator blinks off with each button

press.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you

want to store a VCR code under DVD/AUX, first follow

the procedure for Direct Code Entry (previous page)

and press DVD/AUX in step 2 of Direct Code Entry, then

enter ANY VCR code in step 3 of Direct Code Entry.

Then follow the steps above for Code Search.

Note: Code Search starts from the currently stored

four digit number under that mode. Sometimes the

first code that “works” with your device may only allow

limited functionality (e.g. the MENU button might not

work). There may be a code that performs more

functions. Continue the code search process until the

best code is found.

5. Press and release ENTER to install the

code.

1 2 3 4 5 6 7 8 9

Commentaires sur ces manuels

Pas de commentaire

Ge 24930 GE Universal Remote Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôle à distance Ge 24930 GE Universal Remote